AccuRender nXt

advanced rendering for AutoCAD

Si alguien me puede ayudar, agradecido de antemano

Visitas: 871

Respuestas a esta discusión

Yes.  It does work.  Let me know if you're having any problems.
En  Autocad 2012 cuando ejecuto ar5 o nxt  no abre accurender, que debo hacer
Works well here too, are you on 32 or 64 bit?
32 bit

You might need to appload the *.arx file, manually?

 

Follow these instructions.  Let me know if it works.
ya gacrias me funciono, solo desintale y volvi a instalarlar el autocad y tambien el Nxt

RSS

Search

Translate

Latest Activity

Cesar Montero posted a discussion

USING THE TRIAL VERSION BUT CRASHES WHEN I OPEN MORE THAN TWO DRAWINGS

Hello,I've been using the trial version at work but it crashes when I have more than 2 drawings opened in Auto cad while running a rendering. Is anybody having the same issue? I'd like to know if it is a nxt issue before buying the original.Thanks,CesarSee More
yesterday
Judith Klein replied to Judith Klein's discussion NXT Settings - Was ist das? - what´s that?
"Hi Roy, is it possibel to send me the file in Version 2007? Best regards, Judith."
Wednesday
Roy Hirshkowitz replied to Judith Klein's discussion NXT Settings - Was ist das? - what´s that?
"I've looked pretty closely and haven't been able to find anything wrong with the drawings or the algorithms.  It's definitely having trouble with the lighting in this model-- I did the following: Changed the beam angle on the…"
Tuesday
Alfons Akamp replied to Judith Klein's discussion NXT Settings - Was ist das? - what´s that?
"Da bin ich mal gespannt. wa da heraus kommt."
Sep 17
Roy Hirshkowitz replied to Judith Klein's discussion NXT Settings - Was ist das? - what´s that?
"It's not a units issue, they're ok. I'll let you know soon what I've found."
Sep 16
Judith Klein replied to Judith Klein's discussion NXT Settings - Was ist das? - what´s that?
"Hi Thorsten, Ich habe DDUNITS eingegeben und da sieht man, dass die Einstellung in mm ist. Wenn ich dann ein Licht einfüge, kann ich nicht sehen, was das für eine Einheit ist. Deswegen versteh ich nicht, was ich da und wo ich da was…"
Sep 16
Thorsten Hedrich replied to Judith Klein's discussion NXT Settings - Was ist das? - what´s that?
"Hi Judith, soviel ich verstehe, meint Roy einfach nachzuprüfen, ob die Einheiten, mit denen die Lichtquellen eingefügt werden (mm,cm,m,inches...) auch den verwendeten Einheiten in Deiner AutoCad Zeichnung entsprechen. Dazu einfach in der…"
Sep 16
Judith Klein replied to Judith Klein's discussion NXT Settings - Was ist das? - what´s that?
"Hi Roy, maybe my english isn´t well enough because I don´t know what you mean with "use the _DDUNITS command.  Make sure the insertion scale matches the actual units in your model."  My Settings in ACAD are…"
Sep 16

© 2016   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service