Peter Milner's Discussions

Discussions Replied To (710)	Replies	Latest Activity
"Quick mapping - select object - origin point 1 - lower right point 2 - upper left po…" Peter Milner replied Jul 15, 2011 to MATERIAL MAPPING	18	Jul 18, 2011 Reply by John Ferris
"As the curves are only very slight, use Accurender's quick mapping. Select 3 points…" Peter Milner replied Jul 15, 2011 to MATERIAL MAPPING	18	Jul 18, 2011 Reply by John Ferris
"Absolutely right George. The lighting I use is pretty much straight out the box, but…" Peter Milner replied Jul 15, 2011 to AccuRender nXt - Work in progress?	31	Jul 19, 2011 Reply by Roy Hirshkowitz
"Don't worry, it finished just in time. But it would be useful to be able to stop and…" Peter Milner replied Jul 13, 2011 to Batch rendering save	4	Jul 26, 2011 Reply by Eric B
"It seems to be the default when you create a new glass material. To be honest, I'm n…" Peter Milner replied Jul 13, 2011 to Refraction	5	Jul 13, 2011 Reply by Peter Milner
"Stripped down model attached. " Peter Milner replied Jul 12, 2011 to Refraction	5	Jul 13, 2011 Reply by Peter Milner
"Moving the region further from the wall, it seems as though Path tracer isn't recogn…" Peter Milner replied Jul 12, 2011 to Decal problem with Path Tracer	5	Jul 12, 2011 Reply by Peter Milner
"Here's a stripped down model and the decal. No coincident surfaces, units set to mm…" Peter Milner replied Jul 12, 2011 to Decal problem with Path Tracer	5	Jul 12, 2011 Reply by Peter Milner
"I'll set up a test sample and send it to you tomorrow. I thought it may disappear if…" Peter Milner replied Jul 11, 2011 to Decal problem with Path Tracer	5	Jul 12, 2011 Reply by Peter Milner
"Saturation was set at 1.0 for this one." Peter Milner replied Jun 23, 2011 to sun, hdri, clouds...	7	Jun 23, 2011 Reply by Peter Milner

Discussions Replied To (710)

Replies

Latest Activity

"Quick mapping - select object - origin point 1 - lower right point 2 - upper left po…"

Peter Milner replied Jul 15, 2011 to MATERIAL MAPPING

Jul 18, 2011
Reply by John Ferris

"As the curves are only very slight, use Accurender's quick mapping. Select 3 points…"

Peter Milner replied Jul 15, 2011 to MATERIAL MAPPING

Jul 18, 2011
Reply by John Ferris

"Absolutely right George. The lighting I use is pretty much straight out the box, but…"

Peter Milner replied Jul 15, 2011 to AccuRender nXt - Work in progress?

Jul 19, 2011
Reply by Roy Hirshkowitz

"Don't worry, it finished just in time. But it would be useful to be able to stop and…"

Peter Milner replied Jul 13, 2011 to Batch rendering save

Jul 26, 2011
Reply by Eric B

"It seems to be the default when you create a new glass material. To be honest, I'm n…"

Peter Milner replied Jul 13, 2011 to Refraction

Jul 13, 2011
Reply by Peter Milner

"Stripped down model attached. "

Peter Milner replied Jul 12, 2011 to Refraction

Jul 13, 2011
Reply by Peter Milner

"Moving the region further from the wall, it seems as though Path tracer isn't recogn…"

Peter Milner replied Jul 12, 2011 to Decal problem with Path Tracer

Jul 12, 2011
Reply by Peter Milner

"Here's a stripped down model and the decal. No coincident surfaces, units set to mm…"

Peter Milner replied Jul 12, 2011 to Decal problem with Path Tracer

Jul 12, 2011
Reply by Peter Milner

"I'll set up a test sample and send it to you tomorrow. I thought it may disappear if…"

Peter Milner replied Jul 11, 2011 to Decal problem with Path Tracer

Jul 12, 2011
Reply by Peter Milner

"Saturation was set at 1.0 for this one."

Peter Milner replied Jun 23, 2011 to sun, hdri, clouds...

Jun 23, 2011
Reply by Peter Milner

OYEBANJI EMMANUEL posted a discussion

RENDER FARMER SOFTWARE

Good day Roy,Please i need a link to the render farm software for nxtrender for autocad.Thanks.See More

Jul 30

0 Comments

Roy Hirshkowitz replied to John Ferris's discussion AutoCad 2026

"For compatibility with AutoCAD 2026 you would need to purchase a license upgrade for nXtRender (AccuRender). As an AR5 license holder you are eligible for a discount which we can give to you if you contact us at support@renderplus.com."

May 20

John Ferris posted a discussion

AutoCad 2026

Roy/ All,Currently use AR5 with AutoCad Architecture 2017. Have, and typically use ACAD 2022, but AR5 doesn't load, so I revert back to 2017 when it's time to use AR5).Long time user...had to create new profile due to Architecture firm closing (boss retired). Am now with GC firm and have been using old computer from Arch firm (Boxx Apexx 2) with above mentioned software. Been working fine. Just got new new computer, and am updating software.Downloaded AutoCad Architecture 2026. Where can I get…See More

Apr 23

1 Comment

Orbe3D commented on OYEBANJI EMMANUEL's photo

interior 1x1_2015-2024-08-26-16-55-09x

"Beautiful. You can also check our 3d modeling"

Apr 9

Orbe3D commented on OYEBANJI EMMANUEL's photo

V6x copy

"Beautiful"

Apr 9

Roy Hirshkowitz replied to Maciej's discussion nXt + AutoCAD 2025

"Resolved via email (support@renderplus.com)"

Feb 20

Maciej posted a discussion

nXt + AutoCAD 2025

Gentlemen,The last file I used to load, was ArAcad_24_64.arx, and, unfortunately, it doesn't work with Acad 2025.Any idea how to get the proper nXt-App which suits Acad 2025?Any help appreciated...Regards, Maciej MarkowskiSee More

Feb 17

1 Comment

OYEBANJI EMMANUEL replied to OYEBANJI EMMANUEL's discussion CAN WE GET PETER MILNER TO TRAIN SOME OF US FOR A TOKEN ?

"I meant Chris Fox, not David."

Feb 13

Peter Milner's Discussions (826)

"Quick mapping - select object - origin point 1 - lower right point 2 - upper left po…"

"As the curves are only very slight, use Accurender's quick mapping. Select 3 points…"

"Absolutely right George. The lighting I use is pretty much straight out the box, but…"

"Don't worry, it finished just in time. But it would be useful to be able to stop and…"

"It seems to be the default when you create a new glass material. To be honest, I'm n…"

"Stripped down model attached. "

"Moving the region further from the wall, it seems as though Path tracer isn't recogn…"

"Here's a stripped down model and the decal. No coincident surfaces, units set to mm…"

"I'll set up a test sample and send it to you tomorrow. I thought it may disappear if…"

"Saturation was set at 1.0 for this one."

Search

Translate

Latest Activity

RENDER FARMER SOFTWARE

AutoCad 2026

interior 1x1_2015-2024-08-26-16-55-09x

V6x copy

nXt + AutoCAD 2025