advanced rendering for AutoCAD
Problem to setup Accurender from CD-rom
I have a problem with the set up off Accrender from my CD-rom. In the past I had Windows in a 32-bit version on my computer now I have a 64-bit version of it and also of AutoCAD 2012.
How can resolve the problem. See also attached file
Views: 229
- Attachments:
Replies to This Discussion
-
Permalink Reply by Roy Hirshkowitz on
-
You can't. AccuRender 4 is 32 bit only. You'll need to try nXt which has both 32 and 64 bit versions.
-
-
Permalink Reply by akinlolu olugboji on
-
Still go on right away and install only you will earlier versions of AutoCad too I believe up to 2008 for it to work, but the stability cannot be guarantee. So you still need to go the way of Roy's advise and move up to AR5.
-
-
Permalink Reply by Manuel Corbet on
-
I've been able to install Accurender nXt. But it's very different from Accurender 4. Does someone has a user manual?
-
-
Permalink Reply by Peter Milner on
-
You can find all the help you need on this site.
Click on Support - Help and tutorials to get you started. Then use this forum for any specific questions or advice.
Once you get the hang of nXt, you won't be going back to AR4 as the results are much better and the setting up is far simpler.
-
-
-
Here is a good place to go also the webminar on getting started with Nxt is there also.
-
© 2026 Header image courtesy Peter Milner
Powered by
