corten_pavillon_22mm_1
"Thanks for your kind words.
Yes, all plants are generated with nxt plant-editor.
I have used leaves from Marc Chaumier's plant library.
(Download/ Content + Entourage)"
advanced rendering for AutoCAD
Reflejos en ventanas
Amigos, he estado trabajando en perspectivas exteriores y no he podido lograr un corredto reflejo de los cristales de las ventanas. Como se deben realizar? qeu configuracion de fondo? imagenes? HDRi? Reflejante? Reflactantes? Alguien podria sesorarme?
Views: 501
Replies to This Discussion
-
Permalink Reply by akinlolu olugboji on
-
Look in the galley, once you see what you want leave a comment asking for the settings.
-
-
You can also start with the default glass setting for the UI, and tweak from there to your desired settings.
-
Permalink Reply by Miguel Tano Adanes on
-
Hola Jorge, podrias poner una imagen de lo que deseas obtener? Que entiendes por "correcto reflejo"? Saludos
-
Permalink Reply by Jorge Javier Lara Domínguez on
-
Perdon, no puse lo que trato de conseguir. Aqui esta una imagen con reflejos, como lograr qeu se vea de esa manera? http://www.bioglass.fr/es/nos-domaines-dactions/les-baies-vitrees-o...
-
-
-
Yo usaria unos de los materiales vidrio que vienen con nxt y luego intentar cambiando unos parametros. Basicamente tienes que haber un fondo hdri, que no necesariamente tiene que ser igual al cielo. tambien, no olvides que el reflejo depende del angulo de mirada. Pero si el vidrio es muy reflejante, pierde de transparencia, asi que hay que intentar bastante.
-
Permalink Reply by Roy Hirshkowitz on
-
Trying to reflect the background in the windows is somewhat harder than trying to reflect actual objects in the scene. In either case, always start with an accurate glass material. For example, start with the template glass and change the IOR to 1.55.
To reflect the background, use a good quality, spherical HDRI to both light the scene and provide the background (perhaps combined with appropriate direct sunlight.) Put the sky on its own lighting channel so you can play with its brightness levels in case the HDRI is not properly calibrated to the sky. Use the built in mouse-over light meter to verify that your sky values are reasonable.
Use the exterior lighting preset but change the lighting to HDRi
-
Permalink Reply by Alejandro Testa on
-
Hi Roy, can you explain where is the build in mouse over light meter an how it works. Also another question, which are reasonable values for the hdri? thanks in advance
Alejandro
-
-
Sorry that should be "built-in" (I'll edit the original post.) It's the Value fields in the status bar as you mouse-over a pixel. It expresses the internal value of the pixel in units of candelas/m^2.
Reasonable values for sky hdri have been discussed before. Some guidelines can be found here.
-
-
Thanks Roy.
-
-
Adjun
to una imagen de lo conseguido hasta ahora. Saludos
-
-
Me parece bien. El material vidrio es totalmente transparente? Porque parece apenas blanquito.
Search
Translate
Latest Activity
corten_pavillon_22mm_1
"Very nice piece. Brilliant work.
Are all these plants nxt render plants ?
They look very good. Ground cover is so thoughtful."
"Thank you so much."
"Sorry, do not exactly how to do it right.
If i sent you one or sets, could you "compose" one material as an example?
Maybe this is interesting for others too.."
"Thanks Rich,
exacvtly what i found out.
Only did't know what to dfo with the AO map.."
"nXtRender doesn't use the AO texture image settings for anything, so don't bother trying to use that.
I would start use the Diffuse textures at 100% and experiment with the levels of the Specular Reflection.
You might need to toggle the…"
"Hi,i imported some old Dosch 3D plants in nxtRender for testing, fully textured without an issue.
Also used some free sketchup tree models (*.skp) from sketchuptextureclub and opened them in sketchup, exportet them to *.obj and used them in…"
© 2026 Header image courtesy Peter Milner
Powered by
