"Since there is no Ambient Occlusion Slot in 'Texture Set' Mode of the nXt-Material Editor,
I found another way around what to do with AO Maps:
Baking it into Diffuse; e.g. Multiplying AO Map over Diffuse/Albedo/Colour in…"
advanced rendering for AutoCAD
farm problem
Hi,
I have a issue (maybe bug?) happening when sending renderings to farm. It is happening with only one dwg file - terrain (everything in attachment) - when it is sent to farm it takes very long to produce model for farm (10 minutes) and file *.nxtmodel for farm model is HUGE (over 10 GB). Terrain is quite simple modeled as mass group (couple of mass elemets grouped together), also I tried to convert terrain to 3D solid which it didn't help at all (*.nxtmodel size dropped to 8 GB). But when I export dwg to plain dwg, everything works fine. Can you look at it, Roy?
Views: 452
- Attachments:
-
-
3d terrain.zip, 2.3 MB
-
Replies to This Discussion
-
Permalink Reply by Roy Hirshkowitz on
-
Thanks. I may not get to it for a day or so.
-
Permalink Reply by Garret Diduck on
-
OndraZ, I tried your model here without any issues. The models translated, loaded and rendered all under 2mins on a 2 computer farm. All 3 files acted the same as well. I rendered them at 1700x1100.
-
Permalink Reply by OndraZ on
-
Thanks for trying, Garret. I tried the file I've sent again...and I'm still getting huge model (now 5GB) - see printscreen in attachment. Autocad Architecture 2010, Win 7 Pro 64 bit, nXtFarm 276
- Attachments:
-
-
2011-12-19_094939.png, 11 KB
-
-
-
Here;'s what I am getting using the 'MG' version of the file. There is quite a difference for sure!
AutoCAD Architecture 2012, Win XP 64 bit, nxt Farm 276
- Attachments:
-
-
nxt model.png, 13 KB
-
-
-
So after some time I found out what was the problem. If mass group has decal applied -> nXtmodel is about over 10 GB. After removing decal, nXtmodel size drops to 205 MB and everything works fine...
- Attachments:
-
-
2012-02-23_131955.png, 10 KB
-
-
-
Interesting. I may ask you for a little help in reproducing this when I get back to the office next week. It may be a bug.
Search
Translate
Latest Activity
V1x copy
"The wooden texture of the TV-Console looks quite decent.
The Wallpaper on the left has an interesting structure, maybe it would look even better, if you make the texture seamless + applying a little bit of depth, e. g. with highpass - filter in PS?"
"Thank you for help on this topic!
Will test 'Automesher LT' (developed by Automapki), if I run into troubles again.
[Sometimes I was wondering about, if this forum is still alive... .]"
"Good day,
I searched the former forum posts and found another option to solve this problem which is another plugin to autocad-----AUTOMAPKI. You can give it a try."
Thallasso_Pre_Study_2_50mm
3ds +obj import works for older files-'xfrog-plants', for instance... .Comments + Critics appreciated!Hopefully accurender still survives!
"Found 'Textured Mesh Support' only works with obj and 3ds Files which do not contain PBR Maps.
To 'obj' converted newer 3ds do not render in nXt :-("
© 2026 Header image courtesy Peter Milner
Powered by
