AccuRender nXt

advanced rendering for AutoCAD

Almost 5 min ago this error, any idea????????????

 

Acad 2012

some external reference

some rpc

file is 250 mb

Views: 134

Reply to This

Replies to This Discussion

32 or 64 bit?

64

No clue then.  If it's a reproducible error I'm very interested in the model.

Roy, the model it's 250 MB

You might be able to upload a zipped version.

You could also try simplifying the thing and see if it still crashes.

I try to use a HIDRI that it's HD 56.5 mb and also insert a aereal photo jpg as image in Autocad and the same picture as a decal in NXT it could be the problem. Now I remove de image from Acad and the HIDRI and still crash. I open a new DWG and insert as a block, explode it and purge, right now it's running pretty good.

Just "as is" no settings exterior day light, 11 min. 7 phases, let me make set the light some enviroment things and see what happen...

 

RSS

Search

Translate

Latest Activity

Roy Hirshkowitz replied to Jeff Waymack's discussion Decal doesn't work in an Xref model
"It could be a lot of things-- you can send the model(s) if you like.  nXt doesn't work well with large coords-- drawings that are far from the origin-- check to make sure that isn't the case.  Also check your drawing scale with…"
6 hours ago
Roy Hirshkowitz replied to Todd Dodd's discussion Missing material assignments
"So I can't quite tell if you've solved this or not.  In any case, there is an upload link under support above which should allow you to upload large files.  Zip them first.  ACA configuration files have been problematic in…"
6 hours ago
Todd Dodd replied to Todd Dodd's discussion Missing material assignments
"If you use a custom display configuration for rendering, go to the display manager, in the left window click on the plus button to expand your custom display config, and click on "model".  On the right hand side of the window select…"
10 hours ago
Todd Dodd replied to Todd Dodd's discussion Missing material assignments
"The problem appears to be in the Display Configuration.  i created a display configuration for "Rendering" or "Accurender" which used to work well.  the materials now render correctly in the out of the box…"
10 hours ago
Todd Dodd replied to Todd Dodd's discussion Missing material assignments
"Here is the cad file.  I had to dump a lot out of it to make it small enough to posted but the result is the same.  The wall does not render with the brick material that is assigned to it.  Does anyone know what i am doing wrong?"
12 hours ago
Garret Diduck replied to Jeff Waymack's discussion Mapping materials to xrefs
"There are two ways you can set the orientation for a material without having to create multiple materials. Both are located in the material tab on the right side. MaterialMap is actually an AutoCAD command to set the mapping type, but it will also…"
12 hours ago
Jeff Waymack posted discussions
12 hours ago
Jeff Waymack replied to Jeff Waymack's discussion Mapping materials to xrefs
"Hey Mike...the idea of a material for each roof worked just fine. Thanks!"
13 hours ago

© 2014   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service