AccuRender nXt

advanced rendering for AutoCAD

I inserted quite a few trees, rendered just fine with all the trees. Closed the drawing, pulled it up the next day, rendered again and all the trees disappeared. What could be the problem? See attached image.

Views: 248

Reply to This

Replies to This Discussion

Looks like I know what the problem is. I found out that INSUNITS matters, a lot! Never had to worry about INSUNITS being UNITLESS. When I changed it to INCHES, the trees showed back up.

Now the problem is all my materials that have been assigned are now the wrong scale. They are VERY LARGE numbers. Anyway to globally fix them?

Something else is likely up with this drawing.  I'm pretty sure Unitless will default to meters which should still work fine with the trees-- although the scale will be wrong.  It's also possible that explicitly setting the insertion scale may correct whatever the initial problem was.

No, there's no way to globally scale the materials.  If you're using unusual values for things like Tile Size in the material editor, that's a clue that your units are probably not correct.

RSS

Search

Translate

Latest Activity

Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"Yes, the glass material translated as Refractive automatically."
Dec 23, 2020
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"Yeah-- like I mentioned the caustics are accurate but could be annoying.  Things that might alter it include changing the sun angle so it's not striking the chair's metal surfaces so directly, changing the roughness of the chair…"
Dec 23, 2020
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"Here's the latest render using metallic materials. The chrome now looks a lot better. I do feel though that the reflected light on the back wall is too bright."
Dec 23, 2020
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"Ah-- so that's a function of the material type.  The standard material won't give you a mirror anymore.  You need to change the material to metallic and you should get something more familiar.  Use the Type popdown on the…"
Dec 18, 2020
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"Pacing a mirror on the back wall (reflections = 1.0, noise = 0.0), you can see the difference more clearly (top image is nXt)."
Dec 18, 2020
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"You can see from these two images that there is definitely something wrong with reflective surfaces. It appears the light is being reflected, but not objects or textures. In the nXt version (top image), the carpet texture is being reflected in the…"
Dec 18, 2020
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"It's interesting-- overall the quality of this interior is very high for that short amount of processing, and may be acceptable for certain scenes.  In this one, however, there are some reflective caustics that are taking longer to…"
Dec 17, 2020
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"ARDECAL now works. Here's the image after 10 minutes of rendering. I do have a slight concern that reflective surfaces seem rather dull. This is particularly evident on the end frame of the desk and the base of the chair."
Dec 17, 2020

© 2021   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service