AccuRender nXt

advanced rendering for AutoCAD

At time I launch AutoCad and it freezes at this point(see attach image) No amount of wait makes it thaw except the three button salute. Occasionally the PC needs rebooting as launching autocad agin with a reboot results to the same thing.

This rarely happens with AutoCad 2007, but does with 2012 and 2013.

What could be wrong?

Views: 349

Reply to This

Replies to This Discussion

Nothing to do with nXt.  Hard to say, but it looks like something in your AutoCAD startup folder is causing a failure.  It could be the Tailors app. although the opendcl that gets tagged onto the end of the command line looks suspicious. The fact that you're running mutltiple versions of AutoCAD simultaneously could also be a clue. 

Does it actually shut Windows down?  If not, just shut it down using the Process tab on Task Manager.

It does not shut windows, and nxt has nothing to do with it, just that lots of time no problem only once in a while.

is OpenDCL starting up from an ACAD.LSP? If it is, move it out of there and place it in the StartUp Suite in APPLOAD. Also, what are all of the items in your startup? It is more than likely something following OpenDCL.

Here is the present content of my startup suite.

RSS

Search

Translate

Latest Activity

Paul Cloutier posted a discussion

nXtRender vs AutoCAD RT

My first try with nXt.Same models, same textures, same lights (ies 100W x 4).2 minutes render time.See More
Dec 25, 2019
Paul Cloutier replied to Paul Cloutier's discussion Material help !
"Hello Kevin Thanks. I will look at Yoooootube for more infos."
Dec 25, 2019
Kevin Lockwood replied to Paul Cloutier's discussion Material help !
"I used your mask (alpha) file as a mask in photoshop and saved out to png."
Dec 24, 2019
Paul Cloutier replied to Paul Cloutier's discussion Material help !
"Hello Kevin It's work with your .PNG file. Did you just SAVEAS a .JPG to a .PNG with a image editor ? Capture.PNG Render.png"
Dec 24, 2019
mike makki replied to Daniel Hargreaves's discussion Accustudio
"I can help daniel"
Dec 24, 2019
Kevin Lockwood replied to Paul Cloutier's discussion Material help !
"I'm not sure if you are applying the tree to the region as a decal or as part of a material. if a decal onto the region, I don't think AR will allow 2 decals. I guess you could stack them but I don't think one applies to the other…"
Dec 23, 2019
Paul Cloutier posted a discussion

Material help !

Hello...Need help for settings alpha for this tree bitmap.AutoCAD 2018.Thanks !See More
Dec 23, 2019
Daniel Hargreaves posted a discussion

Accustudio

I know this is hard to believe, but Accustudio is over 20 years old. It has been quiet for a couple of years now at the site. I'm looking to hand it off to the next generation. Is there anyone interested in working on the site and eventually taking over the ownership of it?See More
Dec 3, 2019

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service