AccuRender nXt

advanced rendering for AutoCAD

Hello,

Depending on what i use to set the background I find that the transperancy under the Decal properties is respected or not. For both the following settings, i have set under the Decal properties that the color of interest is transperant. (my decal used is the vegetation and the buildings on the side of the 3d model)

 

Setting 1

On picture n.1 you can see me setting a generic sky background with the Lighting tool, As a result on picture n.2 you can see the vegetation on the left side and the buildings on the right side of the 3d model nicely blending with the generic sky as intended.

 

Setting 2

On picutre n.3 you can see me setting a real sky using WalkAbout for the background, As a result on picture n.4 unexpectedly the vegetation on the left side and the buildings on the right side of the 3d model are not blending in with the background.

What is the problem here?

 

Thank you.

 

Views: 126

Attachments:

Reply to This

Replies to This Discussion

Meanwhile save your rendering as PNG with alpha channel. You can then add the sky background in photoshop or like. 

Make sure the refracted background is set to visible. If that doesn't work it may need to wait until Monday-- I'm traveling today. Akinlolu's suggestion of alpha compositing should also work.
Thank you, I set the refracted background to visible and the result was excelent.

RSS

Search

Translate

Latest Activity

Paul Cloutier posted a discussion

nXtRender vs AutoCAD RT

My first try with nXt.Same models, same textures, same lights (ies 100W x 4).2 minutes render time.See More
Dec 25, 2019
Paul Cloutier replied to Paul Cloutier's discussion Material help !
"Hello Kevin Thanks. I will look at Yoooootube for more infos."
Dec 25, 2019
Kevin Lockwood replied to Paul Cloutier's discussion Material help !
"I used your mask (alpha) file as a mask in photoshop and saved out to png."
Dec 24, 2019
Paul Cloutier replied to Paul Cloutier's discussion Material help !
"Hello Kevin It's work with your .PNG file. Did you just SAVEAS a .JPG to a .PNG with a image editor ? Capture.PNG Render.png"
Dec 24, 2019
mike makki replied to Daniel Hargreaves's discussion Accustudio
"I can help daniel"
Dec 24, 2019
Kevin Lockwood replied to Paul Cloutier's discussion Material help !
"I'm not sure if you are applying the tree to the region as a decal or as part of a material. if a decal onto the region, I don't think AR will allow 2 decals. I guess you could stack them but I don't think one applies to the other…"
Dec 23, 2019
Paul Cloutier posted a discussion

Material help !

Hello...Need help for settings alpha for this tree bitmap.AutoCAD 2018.Thanks !See More
Dec 23, 2019
Daniel Hargreaves posted a discussion

Accustudio

I know this is hard to believe, but Accustudio is over 20 years old. It has been quiet for a couple of years now at the site. I'm looking to hand it off to the next generation. Is there anyone interested in working on the site and eventually taking over the ownership of it?See More
Dec 3, 2019

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service