AccuRender nXt

advanced rendering for AutoCAD

hola quisiera saber farm para una maquina es gratuito ya que al bajarlo me pide clave, por otra parte quisiera saber de adquirir farm para mas maquinas si el procedimiento es similar al que se utiliza con una sola maquina y se puede ir haciendo auto-grabado por ejemplo cada 10 pasadas y si en el caso de estar trabajando con 3 maquinas una de las maquinas " se cuelga " se pierde todo el trabajo de las 3 o pude seguir trabajando por ej con 2, yo adquiri 3 licencias pero como trabajo con diferentes monitores por mas que ponga la misma definicon y el mismo punto de vista cuando quiero sumar me aparecen apenas desplazados por consiguiente no puedo hacer que coincidan la sumatoria. por otro lado si ya no es gratuito farm para 2 maquinas y hay que abonarlos me gustaria saber si hay alguna posibilidad de una prueba con un tiempo limitado ya que depende de esa prueba la adquisicion de farm para varias maquinas o si en mi caso que adquiri 3 licencias yo tengo derecho a usar farm en el caso que sea gratuito para una segunda maquina en dos maquinas diferentes , osea 2 licencias con 2 farm 

espero que sea entendible mi consulta 

gracias

Views: 170

Reply to This

Replies to This Discussion

I'm not exactly sure what you're asking.  Try asking each question separately in a list if I don't answer it.  

You can run two completely independent farms (you'll need a different shared folder for each one.)  In that case each farm can have two machines.  We don't have a trial version of the farm, except for the two machine one.

In general, when a machine crashes the output from the farm will be incomplete.  Whether this output is useful depends a little on your settings.  If you're rendering in single frame mode with the Path Tracer or  Hybrid engine, then yes, the completed results can still be combined in the Image Editor. 

When using fixed resolution views in WalkAbout the results should be identical across different machines with different monitors.

quiero probar hacer andar farm con 2 maquinas y me pide el numero de llave le incorporo la misma que puse para el programa y me dice invalida 

Attachments:

A two machine farm should work without a key.

Hola Darío, ya entendí el problema que tienes con la definición de las imágenes en distintos monitores, necesitas como dice roy darle un tamaño en pixeles que sea x por y  (el 1900 x 1200) ya que al hacerlo como lo haces en 3000000 pixeles  alli es donde deforma la imagen ya que la adecua al tamaño del monitor.  Espero que quede claro sino es asi comunicate conmigo por skype.

Saludos

RSS

Search

Translate

Latest Activity

Rich Hart replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"I see that if I turn the soffit layer off, that those can lights on the right are working. So I assume the soffit is blocking the light. Unfortunately, I'm not able to try moving the can lights down for some reason. I can try looking into this…"
12 hours ago
Brittany Watson replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"I apologize, they are the smaller can lights on right soffit side of the arched ceiling, the bigger ones on the opposite side (left) are working correctly. They do work when the light source is pulled out of the can object or out of the soffit, so…"
15 hours ago
Rich Hart replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Unfortunately, the model was still just too large for my machine. After about 15 minutes I had to turn off the computer so that I could do something else while it was rendering.. Could you give me any idea of where the lights are that don't…"
15 hours ago
Brittany Watson replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Just sent. Thank you for the quick response!"
19 hours ago
Rich Hart replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Can you send us a model where this is happening, to see if we can duplicate it here? As small a model as possible would be appreciated. You can use this link to send it to us: https://renderplus.com/wp2/uploads/ Thanks, Rich"
yesterday
Brittany Watson posted a discussion

Continuous Recessed Lighting Issues

Hi I use AutoCAD Architecture and have been having on going problems with a recessed can light block. I have completed 3 renderings now in which I have had to spend days trying to get my recessed lighting to work. Other lights work, and occasionally some of the can recessed lights will show up. I have exploded the block and added them individually, I have aimed the light and rotated it every which way, but most of the time nothing works.  I have tested out the problem on my current rendering…See More
yesterday
Roy Hirshkowitz replied to Peter Milner's discussion Accurender Studio cloud rendering
"I pulled the option to use my Azure Batch cloud out of the current product.  There wasn't much interest in it.  You can set up your own Azure account with Microsoft and use it, it's not trivial but also not too hard.  I…"
Feb 21
Peter Milner posted a discussion

Accurender Studio cloud rendering

How much does it cost to use cloud rendering?See More
Feb 21

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service