AccuRender nXt

advanced rendering for AutoCAD

pls guys av been trying to map this pix to this solid , i was using object properties and cylindrical decals, am sure am doing something wrong. kindly help. i attached the dwg, the pix and the one that i rendered which is not where am going.

Views: 338

Attachments:

Reply to This

Replies to This Discussion

Reattach drawing. it previews but does not open in autocad

THIS IS IT

Attachments:

Same problem what version of autocad are you using? Try saving as 2000 before reattaching. 

converted to acad 2000

Attachments:

The drawing reads fine here.  What are you trying to do?  I have no idea what you want the picture to look like and what you're getting instead.

i was trying to map the coke jpeg to the  longer side (curve) of the solid, since i was unable to do it thats why i map it on a box drawn on the curve side. pls check the attachment above.

thanks.

If you're trying to get the letters to run along the long axis, you'll need to first rotate the map 90 degrees in PhotoShop or eq. and save the rotated bitmap.  (nXt's cylindrical mapping only maps in the other direction, like mapping a label onto a soup can.)  Once you've got your bitmap it's easier to apply if you take a little time to set up a UCS aligned to the cylinder.  Set the Z-Axis equal to the axis of the cylinder, and set the origin to the center of the lower face.  You should be able to cylindrically map the decal at that point.  If you're still having problems let me know.

 

is still not working thanks.

Here's what I get:

 


Not sure if this is what you want.  I had to draw a circle at the end of the object to help me out.

 

Drawing and rotated bitmap attached.

Attachments:

Oops-- not sure I saved the drawing before I attached it.  Try this one.

Attachments:

yes thanks this is what i want.but i did not understand yur procedure of drawing circle(where).

There isn't a fixed procedure-- do whatever you need to help you out.  I drew a circle at the end of your object and aligned the UCS to the circle.  

Adding the decal wasn't difficult, but it did take me five minutes or so with a couple of failed attempts (mostly to do with the UCS, getting the osnaps right, getting the ortho lock right, etc..  All AutoCAD stuff.)

RSS

Search

Translate

Latest Activity

David Richards replied to Alfons Akamp's discussion Flecken in Bilder
"This page on our site provides some insight into the performance of the different engines http://www.renderplus.com/wp2/wk/NXtRender_Rendering_Engines.htm#Hybrid_Engine_4"
47 minutes ago
Alfons Akamp posted a discussion

Flecken in Bilder

Ich habe da mal eine Frage:Wenn ich Bilder im Standard Modus rendere, sehen diese sehr gut aus.Wenn ich das gleiche Bild im Hybrid Modus rendere, habe ich jede Menge kleine weisse Punkte und Flecken in dem Bild.Warum und wieso kommen diese Flecken????I've got a question:When I render images in standard mode, they look very good.When I render the same image in hybrid mode, I have tons of tiny white spots and spots in the image.Why and why do these spots appear ????See More
Sep 5
Dizzy Gosnell posted photos
Aug 12
George Ioannidis posted discussions
Aug 10
George Ioannidis commented on Peter Milner's photo
Thumbnail

sven-home ambus exec lifestyle 01

"Very professionally looking render! Looks very photo-realistic."
Aug 10
James Bloomer posted photos
Aug 3
Peter Milner posted photos
Jul 30
James Bloomer posted photos
Jul 24

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service