nXT render question/problem

[Chuck C]

I am a new user of nXT, have used Accurender for years (AR4).  Trying to render some poles that are made up of 3D faces, it renders fine in old AR4/Acad2004, but with nXT and Acad 2019 (or 2018) I am getting a very sketchy or corrugated render, without any materials applied.

Is there a setting I'm missing in ACAD or nXT?

I tried redrawing pole as a 3D primitive with 3D faces or solid and get the same result.

I want the pole to be faceted (8 sided) not smooth and round.

Attached is Acad file and render jpg.

The ACAD render command is giving a similar result so I'm thinking it may be an ACAD setting.

[Rich Hart]

Suspecting that the coordinates of the objects were way off in space, I used the MOVE command to move the objects to (0,0,0).

That cleaned up the rendering in both Acad and nXt.

Try that.

[Chuck C]

Interesting....that works, thanks. we may have to set up a different coord system then. We are using data with StatePlane coords from engineering and GIS files.  Interesting that AR4 works fine with the same file (saved down to Acad2004).