AccuRender nXt

advanced rendering for AutoCAD

Well, nobody seems to start a discussion here, so this must be the kick off i suppose.

 

 What am i doing wrong since i don't see any reflections when setting the sky to colour and image in the pathtracer. Auto and hdmi works allright. did i miss something?

 

Also typing "nXt" in the new build doesn't do anything, i'll stick with typing "ar5"

 

Jan

Views: 211

Reply to This

Replies to This Discussion

Good catch-- the Path Tracer doesn't support reflected or refracted RGB color. It's a more rigorous algorithm which requires luminance input only. (I don't really recommend using reflected color in the standard engine either-- the calculation ends up being pretty messy-- but it does sort of work.)

The Path Tracer does support using color backgrounds via an alpha channel-- it should do the compositing for you.

nXt should work-- I've tested it on all the platforms here. First-- let's make sure your build identifies itself as 222 in the About box. Which platform are you using (include 32 or 64)?
Thanks for the answer, i know what to do now.

about the "nxt" thing, i use the 222 build allright. acad 2010 64 bit. should i do something else first then simply typing "nxt"?
Which OS? Are you an administrator on your machine?

jan verzelen said:
Thanks for the answer, i know what to do now.

about the "nxt" thing, i use the 222 build allright. acad 2010 64 bit. should i do something else first then simply typing "nxt"?
windows 7 as administrator.
If you're comfortable you can check some registry keys for me using regedit.

These keys may exist in two different hives HKEY_LOCAL_MACHINE and HKEY_CURRENT_USER.

The start of the key is Software\Autodesk\AutoCAD\r18.0 which is for 2010

The next portion will be something like ACAD-####:### which identifies the vertical version (e.g. ACA) and the localized language.

After that look for Applications\ACCURENDER\Commands. Your should see three commands listed there:

AR5
ARNXT
NXT

Again, if you're comfortable, let me know what you find.
everything looks allright here except for the commands portion, i only see AR5 and ARNXT
Is it possible you're running two different versions of AccuRender nXt? It does re-register everytime it loads-- so installing 222 and running 221 might cause the registry to revert. I'm running out of ideas here.

jan verzelen said:
everything looks allright here except for the commands portion, i only see AR5 and ARNXT
Manually unloading the application in autocad helps. After that i can use the "nxt" command to load it again. Does that means i'm running two versions? i tought that installing a new version deleted the old one.
Stranger still-- I'm not sure I allow the thing to be unloaded.

Yes, a complete uninstall is performed first. Something got confused in your case, though. It shouldn't happen unless you manually moved the thing from one folder to another. You can check whether any of the demand load keys are different--

HKEY_CURRENT_USER -AND- HKEY_LOCAL_MACHINE\Software\Autodesk\AutoCAD\R18.0\ACAD-####:###\Applications\ACCURENDER

value = LOADER holds a path to the product.
value holds the correct path to the product. I never moved the programm from one folder to another.

Now i manually changed the value in the commands section from AR to NXT and that did the job. Since changing things in regedit is very dangerous i switched back to the old settings. Don't know if this does something else then just changing the command from AR5 to NXT.
It's OK to manually change these keys-- you can add a third command in the same format as the other two without a problem. Remember that you have to change both HKLM and HKCU.

I can't really figure out much to do here except wait and see if others have similar problems. Those registry keys should be written during installation and everytime you run the product. The fact that that's not happening is very interesting. There may be some security on your machine that I don't undertand.

Can everyone else type "nxt" and have the product load?
Yes and it loads. Win 7 32 bit OS.

RSS

Search

Translate

Latest Activity

George Ioannidis commented on Peter Milner's photo
Thumbnail

screend brochure 2019 05

"Those are all exceptional work, Peter! Congratulations!On this one only: bricks look big to me, but maybe I am wrong. Also some areas in shadow look still a bit noisy."
Wednesday
Peter Milner posted photos
Tuesday
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"1-  On the Rendering Tab there is a popdown called Destination.  The option is called something like "Local Out of Process".  2-  No, installation will require admin access."
Oct 5
Mark Brinkman replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"I am an old Accurender user. I now need to try and re-create some old images from old models. (about 20 years old) I have now downloaded Accurender Studio, and now work with AutoCAD 2016 and 2017 I have 2 questions related to Accurender Studio: 1)…"
Oct 4
Roy Hirshkowitz replied to Peter Milner's discussion AR Studio ground plane
"Yep-- the groundplane in ArStudio should be turned on in that case-- but you will get a rectangle which may need to be sized.  If it's not turning on, that's probably a bug."
Sep 26
Peter Milner replied to Peter Milner's discussion AR Studio ground plane
"Not to worry. I've just seen that ArStudio has its own version of a ground plane. It just doesn't translate the old nXt one."
Sep 26
Roy Hirshkowitz replied to Peter Milner's discussion AR Studio ground plane
"Sorry-- just got back into town last night.  Infinite objects aren't supported in ArStudio-- so yes-- the ground plane has to be represented by a finite object, in this case a rectangle.  You don't have to use mine, you can use…"
Sep 25
mike makki commented on Tibor K. Karsai's photo
Thumbnail

WestlakeV - Copy

"good image and nice montage... the only thing is that the sky is too blue ... a light colour and would make it perfect"
Sep 21

© 2019   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service