AccuRender nXt

advanced rendering for AutoCAD

Hola Todos
Necesito una ayuda para elegir un pc a comprar
Quiciera saber si un procesador de 4 cores y 3.2 g Ghz puede ser mejor
que uno de 8 Cores con 2.0 Ghz
Pues me estan cotizando estas dos opciones
XEON E5-2643 de 4 Cores 3.2 Ghz y
XEON E5-2650 de 8 Cores 2.0 Ghz
Quiciera saber si tener menos Ghz significaria que el procesador tiene menor rendimiento . o si por el contrario al tener mas cores tiene un mejor rendiniento

Muchas Gracias
(Traduccion de google)

Hello All
I need help in choosing a pc to buy
I would love for to know if a 4-cores processor and 3.2 g Ghz can be better
to one with 8-cores and 2.0 Ghz
For me these two options are trading
XEON E5-2643 4-core 3.2 Ghz and
XEON E5-2650 8-core 2.0 Ghz
I would love for having less Ghz know if it would mean that the processor has lower performance. or, on the contrary to have more cores is better rendiniento

many Thanks

Views: 131

Reply to This

Replies to This Discussion

Both are important-- multiply clock speed by # of processors to get an estimate for comparison.

These two machines should be pretty similar in performance.  The 8-core may be slightly faster for rendering.  The 4 core will likely be faster for everything else.

Thanks Roy
any more question for large assembly Autocad or Autocad Plant 3d Files How Pc is better?

Video cards can make a big difference when working with large drawings in AutoCAD-- this is not important for rendering in nXt (except for WalkAbout).

RSS

Search

Translate

Latest Activity

ebenezer attah koomson posted photos
yesterday
James Bloomer posted photos
May 1
Roy Hirshkowitz commented on Maciej's photo
Thumbnail

c3

"No license yet. Send some results when you can-- might be easier as a forum post instead of this comment section."
Apr 7
Roy Hirshkowitz commented on Maciej's photo
Thumbnail

c3

"The drawings are likely scaling correctly-- don't scale the geometry please. These are only display units for the arstudio interface."
Apr 7
Maciej commented on Maciej's photo
Thumbnail

c3

"You were right, Roy. It was about the file name - ash on my head. ARStudio seems to be very ok for my humble interiors' purposes. One minor point (see attached) - meters or millimeters only, what about centimeters? I need to scale all my…"
Apr 7
George Ioannidis commented on Maciej's photo
Thumbnail

g2

"Yeah, I know, usual situation. :)"
Apr 7
Roy Hirshkowitz commented on Maciej's photo
Thumbnail

c3

"Looks like there's no file name.  Try saving the drawing to a file first, then run ArStudio.  This is a bug, obviously.  Thanks."
Apr 7
Maciej commented on Maciej's photo
Thumbnail

c3

"I followed all the instructions and that is what I see now...Life is a struggle... Is there something I did wrong? AutoCAD 2013, nXt 0358-SG17, Windows 7"
Apr 7

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service