AccuRender nXt

advanced rendering for AutoCAD

Hi everybody,

I have a 20mb file with RPC content which I xref into a new file. While the RPC content does render in the primitive file, it doesn't in the new file. What's wrong?

 

Views: 822

Reply to This

Replies to This Discussion

Do they render if you use the AutoCAD _RENDER command?
I'll try as soon as I have time, Roy. At the moment I'm rendering the original files but surely I'll let you know.
Do not know why but X-refed RpC's do not render. Never tried with the autocad render command

In a simple scene when only the file where the RPC is, is X-refed it renders either way.

Bring in the whole scene and the RPC shows only when the visual style is in 2d wireframe.

 

Same also when you render the RPC does not show in the rendering either way.

I have no idea what you're saying.  You'll need to provide a set of steps for me to try to reproduce the problem (if it is a problem.)

Problem is RPC's not rendering when X-Ref. Well i found out now that they do, dependiing on the complexities. 

 

When you a bunch of RPC's in a drawing without any other objects, X-ref into another drawing they render fine both in Nxt and with autocad naive render command.

 

When you also have a single RPC with other object but not much and you X-ref only that file it also renders fine.

 

Should you put that single RPC with the other (not so much) objects and X-ref into a bigger drawing with other objects, the RPC does not render.

In all my believe is that it has to do more with the plugin than with nxt or autocad.

What autocad render (with the render command) is what nxt render too (either in walkabout window or an autocad viewport)

 

Akinlolu, you've actually done the job I was going to do further. To me, and as you describe, it is a problem of RPC plugin, not ACAD or nXt themselves. Now I'm rendering a 50mb file containing only RPC with a project x-refed and works fine!
I will try sharing this tread with the tech folks at Archvision maybe they can  help.

RSS

Search

Translate

Latest Activity

Rich Hart replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"I see that if I turn the soffit layer off, that those can lights on the right are working. So I assume the soffit is blocking the light. Unfortunately, I'm not able to try moving the can lights down for some reason. I can try looking into this…"
yesterday
Brittany Watson replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"I apologize, they are the smaller can lights on right soffit side of the arched ceiling, the bigger ones on the opposite side (left) are working correctly. They do work when the light source is pulled out of the can object or out of the soffit, so…"
yesterday
Rich Hart replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Unfortunately, the model was still just too large for my machine. After about 15 minutes I had to turn off the computer so that I could do something else while it was rendering.. Could you give me any idea of where the lights are that don't…"
yesterday
Brittany Watson replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Just sent. Thank you for the quick response!"
yesterday
Rich Hart replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Can you send us a model where this is happening, to see if we can duplicate it here? As small a model as possible would be appreciated. You can use this link to send it to us: https://renderplus.com/wp2/uploads/ Thanks, Rich"
Wednesday
Brittany Watson posted a discussion

Continuous Recessed Lighting Issues

Hi I use AutoCAD Architecture and have been having on going problems with a recessed can light block. I have completed 3 renderings now in which I have had to spend days trying to get my recessed lighting to work. Other lights work, and occasionally some of the can recessed lights will show up. I have exploded the block and added them individually, I have aimed the light and rotated it every which way, but most of the time nothing works.  I have tested out the problem on my current rendering…See More
Wednesday
Roy Hirshkowitz replied to Peter Milner's discussion Accurender Studio cloud rendering
"I pulled the option to use my Azure Batch cloud out of the current product.  There wasn't much interest in it.  You can set up your own Azure account with Microsoft and use it, it's not trivial but also not too hard.  I…"
Feb 21
Peter Milner posted a discussion

Accurender Studio cloud rendering

How much does it cost to use cloud rendering?See More
Feb 21

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service