iteration_3_south_west_view
Last Approach; tried to mimic the 'rammed earth' walls inside.Hope it will be worth the time spend.
advanced rendering for AutoCAD
RPC doesn't render if xref
Hi everybody,
I have a 20mb file with RPC content which I xref into a new file. While the RPC content does render in the primitive file, it doesn't in the new file. What's wrong?
Views: 933
Replies to This Discussion
-
Permalink Reply by Roy Hirshkowitz on
-
Do they render if you use the AutoCAD _RENDER command?
-
Permalink Reply by Miguel Tano Adanes on
-
I'll try as soon as I have time, Roy. At the moment I'm rendering the original files but surely I'll let you know.
-
Permalink Reply by akinlolu olugboji on
-
Do not know why but X-refed RpC's do not render. Never tried with the autocad render command
-
-
In a simple scene when only the file where the RPC is, is X-refed it renders either way.
-
-
Bring in the whole scene and the RPC shows only when the visual style is in 2d wireframe.
Same also when you render the RPC does not show in the rendering either way.
-
-
I have no idea what you're saying. You'll need to provide a set of steps for me to try to reproduce the problem (if it is a problem.)
-
-
Problem is RPC's not rendering when X-Ref. Well i found out now that they do, dependiing on the complexities.
When you a bunch of RPC's in a drawing without any other objects, X-ref into another drawing they render fine both in Nxt and with autocad naive render command.
When you also have a single RPC with other object but not much and you X-ref only that file it also renders fine.
Should you put that single RPC with the other (not so much) objects and X-ref into a bigger drawing with other objects, the RPC does not render.
-
-
In all my believe is that it has to do more with the plugin than with nxt or autocad.
What autocad render (with the render command) is what nxt render too (either in walkabout window or an autocad viewport)
-
-
Akinlolu, you've actually done the job I was going to do further. To me, and as you describe, it is a problem of RPC plugin, not ACAD or nXt themselves. Now I'm rendering a 50mb file containing only RPC with a project x-refed and works fine!
-
-
I will try sharing this tread with the tech folks at Archvision maybe they can help.
Search
Translate
Latest Activity
"Since there is no Ambient Occlusion Slot in 'Texture Set' Mode of the nXt-Material Editor,
I found another way around what to do with AO Maps:
Baking it into Diffuse; e.g. Multiplying AO Map over Diffuse/Albedo/Colour in…"
V1x copy
"The wooden texture of the TV-Console looks quite decent.
The Wallpaper on the left has an interesting structure, maybe it would look even better, if you make the texture seamless + applying a little bit of depth, e. g. with highpass - filter in PS?"
"Thank you for help on this topic!
Will test 'Automesher LT' (developed by Automapki), if I run into troubles again.
[Sometimes I was wondering about, if this forum is still alive... .]"
"Good day,
I searched the former forum posts and found another option to solve this problem which is another plugin to autocad-----AUTOMAPKI. You can give it a try."
Thallasso_Pre_Study_2_50mm
3ds +obj import works for older files-'xfrog-plants', for instance... .Comments + Critics appreciated!Hopefully accurender still survives!
© 2026 Header image courtesy Peter Milner
Powered by
