AccuRender nXt

advanced rendering for AutoCAD

Does anyone knows a way to view homemade panoramas on a 3d tv or with 3d glases?
I am tired of viewing 3 dimensional renderings on a 2d screen :-)

Views: 336

Reply to This

Replies to This Discussion

You can render the same scene twice from points 3 inches apart.

No idea though how you would convert these to a 3D format for viewing on a 3D screen.

I presume you would need some clever video editing software.

You render two images as Peter said and then you create an anaglyph using free software like this: http://www.stereoeye.jp/software/index_e.html - download on the bottom of the page

Thats obvious. You always should have two images

Peter Milner said:

You can render the same scene twice from points 3 inches apart.

No idea though how you would convert these to a 3D format for viewing on a 3D screen.

I presume you would need some clever video editing software.

We are living in 2012.

Anaglyphs are so 1900

Today we have 3d tv's and autocad (with next) produces beautiful "3d" images.

With two of these images (at a certain distance) we would be able to make a stereographic image

But the question was; How to view those (two) images on a 3d tv or with 3d glases.

You should need a conversion and a viewer 

OndraZ said:

You render two images as Peter said and then you create an anaglyph using free software like this: http://www.stereoeye.jp/software/index_e.html - download on the bottom of the page

3D movies are filmed with special cameras and then the digital movie is processed by some software. I used to do 3D rendered views when I was at the university, still with AR3. Basically, you need to set up two cameras pointing the same point of view, the distance between the two cameras (left and right ones) should be 7-8 cm along the perpendicular line to the point of view direction. Then render the two different views and mix them with some software as OndraZ suggested. You can also put the two images side-by-side in a display (monitor or tv), but you need to practice with double stereoscopic view techniques by crossing your eyes (find a lot of them over the internet). Once more, at the time of frame mounted 35mm slides, I used the visor like that in the image.

Attachments:


File needs to be in *.zip format, *.rar not supported.
Miguel Tano Adanes said:

3D movies are filmed with special cameras and then the digital movie is processed by some software. I used to do 3D rendered views when I was at the university, still with AR3. Basically, you need to set up two cameras pointing the same point of view, the distance between the two cameras (left and right ones) should be 7-8 cm along the perpendicular line to the point of view direction. Then render the two different views and mix them with some software as OndraZ suggested. You can also put the two images side-by-side in a display (monitor or tv), but you need to practice with double stereoscopic view techniques by crossing your eyes (find a lot of them over the internet). Once more, at the time of frame mounted 35mm slides, I used the visor like that in the image.

Sorry for the .rar file. I attach the .zip one.

Attachments:

Michel,

I know the system.

I also did this when I was at school (30 years ago).

The fact is that everyone has now a 3d tv and I can make two renderings in autocad/accurender for my clients.

How can I present those two images into one 3d on there tv?

Marko

Ok, so you could try to download the software that OndraZ already suggested you (http://www.stereoeye.jp/software/index_e.html) or find others over the internet, and try different solutions on the TV you'll use for presentation in order to chose the better mixing-up system. I don't have a 3D TV so I can't tell you which is better depending on the tv brand and glasses.

Would something like this do the job?

http://www.cmsoft.com.br/index.php?option=com_content&view=cate...

Peter

Peter,

That was probably the right answer.

I will go to try that software.

Googling also found the software Stereo Phot Maker.

MPO file is most likely the thing that will work.

 

Thanks

RSS

Search

Translate

Latest Activity

Kevin Lockwood replied to MES's discussion Animation using WalkAbout in CAD.
"Its been years for me too.  I think Daniel spent some time getting CoMotion running again.  http://www.accustudio.com/marketplace/comotion As to stitching frames, the tool I used to use wasn't working last time I tried, but I did…"
Saturday
Rich Rosemann replied to MES's discussion Animation using WalkAbout in CAD.
"Is CoMotion no longer being updated?"
Nov 11
Roy Hirshkowitz replied to MES's discussion Animation using WalkAbout in CAD.
"Sorry you're not getting a better response here-- our animation stuff is pretty rudimentary.  Hoping someone will still chime in though.  I haven't looked at this stuff for such a long time, my guess is that the software I used…"
Nov 8
MES posted a discussion

Animation using WalkAbout in CAD.

Hi,I want to create a "fly thru" or "walk thru" animation using Nxt in CAD 2015.  Anyone has experience with this and would like to share how to use it? Any important tips?Thank you!See More
Nov 7
Roy Hirshkowitz replied to Enrico Gheno's discussion Perspective between 3D model and background image on NXT autocad 2015
"There are a couple of ways to do this-- In nXt the WalkAbout window allows you to insert and manipulate background images and your viewpoint independently.  You can either allow nXt to composite the image for you, or save the thing with a…"
Nov 4
Enrico Gheno posted a discussion

Perspective between 3D model and background image on NXT autocad 2015

Hi, I would like to insert my 3D model on an image in background, obviously with the correct position, size and perspective lines.Is there a method to move the 3D model to adapt it at the image in background?At the moment i can only try to setting the position of my 3D model with the Autocad camera and launch the render to control if the position is correct, but it's impossible to find it. I must render my 3D model and put it in my image with Photoshop. Not a great result.Look down here, the…See More
Nov 3
Peter Milner replied to Peter Milner's discussion RenderFarm passes and tasks
"Hi Rich, That could be the answer. We have a new designer working at one of our other sites and she may have started a drawing from scratch instead of using a template. Therefore it would be set to use the standard rendering engine. Thank you for…"
Oct 22
Rich Hart replied to Peter Milner's discussion RenderFarm passes and tasks
"Is the rendering engine set t be the Path Tracer on that machine? I see it is disabled on my computer if the engine is set to Standard. http://accurender.ning.com/forum/topics/tasks-in-render-farm-window"
Oct 22

© 2019   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service