AccuRender nXt

advanced rendering for AutoCAD

Roy, All...

Upgraded to new computer and software...Win 10, ACAD Architect 2017, nXt 1.0.358...

Working on new rendering/dwg file, starting with one done last year. Previously working imported 3DS objects (people) are weirding out...putting materials in the wrong locations (see attached.)

Thought I'd start from scratch...new file. ACAD...nXT...add textured mesh object...select...select location...pick...crash (see attached for ACAD error message).

Next...copied the previously used 3DS people to a new ACAD drawing...materials in wrong locations (see attached dwg and image).

TLDR - New hardware and software...textured meshes used to work and now don't.

Ideas?

Thanks,

John

Views: 138

Attachments:

Reply to This

Replies to This Discussion

I'll see if I can track these problems down.

Thanks Rich...Let us know.

I posted a new version where Importing 3DS files is working again, and your sampel drawing People.dwg is rendering correctly in the latest versions of AutoCAD.

I tested this in in AutoCAD versions 2015 through 2018, 64 and 32 bit.

http://renderplus.com/wp2/download/?product=nXtRender%20for%20AutoCAD

Don't know how you do it....but you did it! It works...

Thanks Rich!

John

Great! Let us know if you find anythng else that needs attention.

RSS

Search

Translate

Latest Activity

Rich Hart replied to Paul Jackson's discussion Bricscad
"Unfortunately, we don't have a version that works with BricsCAD now, and that older trial version cannot be reinstated."
Jun 19
Alfons Akamp replied to Paul Jackson's discussion Bricscad
"Ich habe hier auch eine nxtrender Version für Bricscad 15. Die sieht anders aus, als die von Acad. Leider ist auch bei mir der Testzeitraum schon lange abgelaufen. Gibt es die Möglichkeit mir eine Testlizenz dafür zuzuschicken??…"
Jun 19
George Ioannidis commented on Chris Fox's photo
Thumbnail

Bedroom

"Another good rendering. Those two photoshopped reading lights are not looking good though. They don't follow the perspective, the left one is higher than the right one. Also, they are supposed to be turned on (judging from the light on wall…"
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Single Family Home

"Great image as always. I would just blur the tree shadow on the lawn to match soft shadows on the building. Nice blending of cut-out greenery. Excellent job."
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Railroad kitchen

"Very nice rendering Chris! The only thing that distracts me is the fruit bowl. It's too evidently pasted in PS.  Another thing (nothing to do with rendering) is the microwave above the stove. I would rather expect a cooker hood there."
Jun 15
akinlolu olugboji posted a discussion

trim and extension command

On AutoCad 2021.The trim and extension command works funny. I initiate the command then click the cutting edge (press entre) then click the lines I need to trim or extend.Now I initiate the command and as soon as I click the object selected trims or extend.  How can I correct this, it is really affecting my work?See More
Jun 14
Chris Fox posted photos
Jun 12
ebenezer attah koomson posted photos
Jun 3

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service