AccuRender nXt

advanced rendering for AutoCAD

Hi Roy,

 

I was wondering if there would be Tropical plants and trees eventually for NXT?  I live in Florida and it is critical for my work. 

 

Also, can anyone recommend any other tree program  (other than Archvision RCP, I have many of those libraries already)

 

Thank you!

Views: 290

Reply to This

Replies to This Discussion

Nothing scheduled at the moment for any tree libs.  Can't really comment on "eventually."

OK.  Thank you!

Hi Marc, evermotion Vol 85 has a large library in MAX format,  but you have to transform this in 3ds file and then assigne all the materials.  Its a hard job but excellent quality, usually  they are huge models. Here you can see some samples.

Attachments:

wow, very nice.

 

Thank you for the heads up.

 

 

You could try here too or here.

I have a link at home to a bunch of free plants from xfrog. Thsi isn't the link I had, but there are a bunch of free-bees http://xfrog.com/130-free-xfrogplants-now-available/. I know I posted the other link here. George had some luck rendering them.

RSS

Search

Translate

Latest Activity

Roy Hirshkowitz replied to Jeff Waymack's discussion Decal doesn't work in an Xref model
"It could be a lot of things-- you can send the model(s) if you like.  nXt doesn't work well with large coords-- drawings that are far from the origin-- check to make sure that isn't the case.  Also check your drawing scale with…"
4 hours ago
Roy Hirshkowitz replied to Todd Dodd's discussion Missing material assignments
"So I can't quite tell if you've solved this or not.  In any case, there is an upload link under support above which should allow you to upload large files.  Zip them first.  ACA configuration files have been problematic in…"
4 hours ago
Todd Dodd replied to Todd Dodd's discussion Missing material assignments
"If you use a custom display configuration for rendering, go to the display manager, in the left window click on the plus button to expand your custom display config, and click on "model".  On the right hand side of the window select…"
8 hours ago
Todd Dodd replied to Todd Dodd's discussion Missing material assignments
"The problem appears to be in the Display Configuration.  i created a display configuration for "Rendering" or "Accurender" which used to work well.  the materials now render correctly in the out of the box…"
8 hours ago
Todd Dodd replied to Todd Dodd's discussion Missing material assignments
"Here is the cad file.  I had to dump a lot out of it to make it small enough to posted but the result is the same.  The wall does not render with the brick material that is assigned to it.  Does anyone know what i am doing wrong?"
10 hours ago
Garret Diduck replied to Jeff Waymack's discussion Mapping materials to xrefs
"There are two ways you can set the orientation for a material without having to create multiple materials. Both are located in the material tab on the right side. MaterialMap is actually an AutoCAD command to set the mapping type, but it will also…"
10 hours ago
Jeff Waymack posted discussions
10 hours ago
Jeff Waymack replied to Jeff Waymack's discussion Mapping materials to xrefs
"Hey Mike...the idea of a material for each roof worked just fine. Thanks!"
10 hours ago

© 2014   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service