AccuRender nXt

advanced rendering for AutoCAD

nXtRender is installed on currrent workstation and works great. Got a new machine and want to install on that machine and verify operation before dumping from first machine. Downloaded install file and am unable to select RPC License.

Installation (running of install file) notes following errors:

nXtRender_64 - InstallShield Wizard

   Unable to launch C:\Program Files\AccuRender nXt\RPS_Support\redist\vcredist_2008_x86.exe./Q

nXtRender_64 - InstallShield Wizard

   Unable to launch C:\Program Files\AccuRender nXt\RPS_Support\redist\vcredist_2010_x86.exe./Q

nXtRender_64 - InstallShield Wizard

   Unable to launch C:\Program Files\AccuRender nXt\RPS_Support\redist\vcredist_2005_x64.exe./Q

nXtRender_64 - InstallShield Wizard

   Unable to launch C:\Program Files\AccuRender nXt\RPS_Support\redist\vcredist_2008_x64.exe./Q

nXtRender_64 - InstallShield Wizard

   Unable to launch C:\Program Files\AccuRender nXt\RPS_Support\redist\vcredist_2010_x64.exe./Q

nXtRender_64 - InstallShield Wizard

   Unable to launch C:\Program Files\AccuRender nXt\reg_thumb.bat.

Upon further inspection, based on review of other posts in this forum, I have discovered that there is no subdirectory with the name "redist", let alone the files noted as being within.

Please advise as to how to remedy this so that I can get rolling with this new machine.

Thanks!

64-bit system, AutoCAD 2017

Views: 48

Reply to This

Replies to This Discussion

Somehow those files were left out of the latest install.

I posted a new install with those files included.

Please download and reinstall the latest from our downloads page an see if it does not fix this for you.

http://www.renderplus.com/wp2/download/?product=nXtRender%20for%20A...

Thanks,

That appears to have worked. One more thing, is there an upgrade option from a one seat license to a three seat license?

Thanks!

Yes, we can send you an invoice for the difference in price and convert your license to a three seat license.

Let me know if you would like to do that. Just send me an email:

rich.hart@renderplus.com

RSS

Search

Translate

Latest Activity

alex dounis replied to alex dounis's discussion Render settings to show corner of walls or wall edge Please !!!
"Thanks Peter , Ill give it a go. Cheers Alex"
yesterday
Dizzy Gosnell replied to Dizzy Gosnell's discussion nXt and AutoCad 2019
"Hey Rich, Fantastic stuff, right on the money, worked like a charm. Thanks so much. Diz"
Thursday
Rich Hart replied to Dizzy Gosnell's discussion nXt and AutoCad 2019
"Download and install the latest version from: nXtRender Downloads Page Normally nXtRender registers its commands with AutoCAD during installation. On occasion, this mechanism may fail. In this case you will need to manually load nXt the first time…"
Thursday
Dizzy Gosnell posted a discussion

nXt and AutoCad 2019

Are there new .ARX files etc needed to get nXt rendering running inside Acad 2019 I've tried loading the files that worked for Acad 2016 but when I type 'nxt' on the Acad command line it says not recognized.Many thanksDizSee More
Thursday
Peter Milner replied to Peter Milner's discussion Animation on Farm
"Thanks Roy. I'll base the number of frames on multiples of 80 then."
Wednesday
Roy Hirshkowitz replied to Peter Milner's discussion Animation on Farm
"Looks like it's hardcoded to 20 frames / task."
Wednesday
Peter Milner replied to Peter Milner's discussion Animation on Farm
"Is there any way of finding out how many frames in a packet, so that I can optimize the number of frames between 4 nodes?"
Wednesday
Peter Milner replied to Peter Milner's discussion Texture orientation
"No rush. I'm only experimenting with ArStudio at this stage. "
Wednesday

© 2018   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service