AccuRender nXt

advanced rendering for AutoCAD

Roy

Trying to sort out my lighting settings to get the look a got in AR4.

A long story short a want to understand the best way to control sun intensity to give different times of the day, but allow my lights to show?

See image attached.....................................

Light seetings 1 - is standard preset EXTERIOR (It looks good but have control issues)

What is the best way to control the level of the sun, showing midday, afternoon, night.

How do I get my internal/external lighting to show up and shine.

In this render  "Lighting - Advanced - Lights - On" but the lights like in "Light seetings 2" do not show up unless I change it from 150w to 150000w, and this mades the lights go funny.

Light seetings 2  - is standard preset Studio (Lights look good but have sun shandow issues) Same model and the lighting shows up perfect when in studio with lights in the right range. 40-200watts.

What I,m asking is to what are the main settings I should be playing with to get that cool look when the sun fades in the afternoon and the house lights start to come though with  there own affect on the front of the house?

Views: 561

Attachments:

Reply to This

Replies to This Discussion

Also now you seen the model and know what I,m looking for...........

Should use - standard or path tracer???

I think that if you use path tracer exterior renderings should look better, but if you have lights inside the house I am afraid you'll wait forever the tracer to solve the scene. In other words, the inside of the house will be full of fireflies (at least that is my experience). If you turn internal light channel off, fireflies should disappear.

I think the quickest way to get what you want is to use channels. Put the sun on channel 0, the sky on channel 1 & the interior lighting on channel 2. Thus you will have 3 channels in the advanced tab. Once your rendering has cooked for a little while you can adjust each of the slides for the 3 channels and get the look you are trying to achieve.

Will try this channel method and see if that gives me the control.

Thanks   - will be back soon with results............

How do you turn the sun level up and down, how do you create night or afternoon or morning.???

In lighting tab change the number of available light channels to 3 or 4 (we have max. 8 channels available). In sun tab set sun channel to 1 and skylight to channel 0. Group artificial lights to other channels, according to some eventual grouping logic (spots in separate channel, floor lamps in other etc.) You can then change the value of each light channel raising or lowering the light channel power in channel panel during the rendering or later, after the rendering is stopped, you save result to native nxt image file and open it in nxt image editor. There you can play with light channels as well as with other effects like haze, glow and vignette. If you want night shot, simply set sun and sky value to 0 or almost zero (like 0.001). If you want daytime rendering, turn off artificial light channels off setting them to 0.

Thank you, done some quick tests and this is working for me.

Will do tests on my full model tonight and see if it's what I need.

thanks for the post.........

RSS

Search

Translate

Latest Activity

Rich Hart replied to Paul Jackson's discussion Bricscad
"Unfortunately, we don't have a version that works with BricsCAD now, and that older trial version cannot be reinstated."
Jun 19
Alfons Akamp replied to Paul Jackson's discussion Bricscad
"Ich habe hier auch eine nxtrender Version für Bricscad 15. Die sieht anders aus, als die von Acad. Leider ist auch bei mir der Testzeitraum schon lange abgelaufen. Gibt es die Möglichkeit mir eine Testlizenz dafür zuzuschicken??…"
Jun 19
George Ioannidis commented on Chris Fox's photo
Thumbnail

Bedroom

"Another good rendering. Those two photoshopped reading lights are not looking good though. They don't follow the perspective, the left one is higher than the right one. Also, they are supposed to be turned on (judging from the light on wall…"
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Single Family Home

"Great image as always. I would just blur the tree shadow on the lawn to match soft shadows on the building. Nice blending of cut-out greenery. Excellent job."
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Railroad kitchen

"Very nice rendering Chris! The only thing that distracts me is the fruit bowl. It's too evidently pasted in PS.  Another thing (nothing to do with rendering) is the microwave above the stove. I would rather expect a cooker hood there."
Jun 15
akinlolu olugboji posted a discussion

trim and extension command

On AutoCad 2021.The trim and extension command works funny. I initiate the command then click the cutting edge (press entre) then click the lines I need to trim or extend.Now I initiate the command and as soon as I click the object selected trims or extend.  How can I correct this, it is really affecting my work?See More
Jun 14
Chris Fox posted photos
Jun 12
ebenezer attah koomson posted photos
Jun 3

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service