Nxt crashing

[Peter Hoffmann]

I just got a new computer, AMD FX8150 8 core, 16 gig ram running Autocad 13.

Problem is my renderings keep hanging up anywhere from a few minutes to 4 hours after i start them.

this morning I tried to reinstall NXT but aborted accidentally.  Now I cant even reinstall it, keep getting the following msg:

An error occuredd during the installation fo assembly 'Microsoft.VC80.CRT, type="win32.version="8.0.50727.6195".publicKey Token="1fc8b9a1e18e3b".processorARchitecture="amd64".please refer to Help and Support for more information. HRESULT:0x80073715.

have a deadline today, running out of options.

[Ian Foster Griffith]

Have issue with NTX crashing with one of my computers. You are running 64bit system right?

Found my problem was - Relationship between motherboard, cpu and RAM.

When running at 100% some RAM requires a high voltage than the standard bois settings.

I changed my power settings from 1.8v to 2.1v (setting for my MB only) and changed ram chips to lower Mhz, resolving my issues.

But I post this because in my online reseach it is clear that some motherboards don't like some types of ram.

Not just a NXT issue, any high cpu/ram program brings the issue when ram is push to it's limits.

But I would look first at the Microsoft OS problems first look fishy.

[Ian Foster Griffith]

All so check motherboard chipset drivers for update, that can sometime help...........

[Peter Hoffmann]

thanks.

[Peter Hoffmann]

Thanks Ian.

Any details you can give me would be helpful.  i'm going to have IT try your remedies.