AccuRender nXt

advanced rendering for AutoCAD

 I OPEN A 3D DRAWING IN AUTOCAD 2010 IT CRASH WHILE RENDERING WITH ACCURENDER.

Views: 191

Attachments:

Reply to This

Replies to This Discussion

If it's crashing consistently with a particular drawing, let me know, there may be a problem.  Please don't use all caps when composing forum messages.

yes... is every 3d model that I I import from autocad 2018 to autocad 2010 and  it dosent matter that I convert the drawing  in trueview to dwg 2010 it continues the error, it happens this way, I open the drawing in autocad 2010 then I open accurender to render the drawing and then it gives me the error.

Attachments:

Interesting.  I'm not sure what I can do about it-- the oldest AutoCAD I have available for testing is 2013.  AutoCAD 2010 is actually 12 years old which is an eternity in software.  You can try sending me a simple converted drawing (2010 .dwg) that you verify is crashing and I'll take a look at it.  I'm not too optimistic, though.

One additional thought. 

A known issue when saving drawings to a previous version is that nXt must be loaded and running before you convert the drawing. Try the following:

1. Open your 2018 drawing in AutoCAD.

2. Start nXt by typing "nXt" or however you normally start it.

3. Save the drawing to a previous format such as 2010.

See if this procedure prevents the crash.

I think Norton mentioned that he did the conversion using TrueView, not the AutoCAD itself. He is still on ver. 2010 I suppose, otherwise he could do renderings directly in 2018. Maybe TrueView isn't quite versionwise correct as regards to conversions of 3D drawings from the newer to the older versions DWG, who knows :)

I'm guessing it's the same problem.  nXt has to be present for a conversion to work properly with a drawing that has nXt data.  That's a known issue.  Converting using any other method probably will not work properly if you need to use nXt on the converted drawing.

RSS

Search

Translate

Latest Activity

OYEBANJI EMMANUEL posted a photo

Render 1 copy (1)

This is a remake of one of Peter Milner's scenes. I dont have the file. I photo-matched it in sketchup and rendered in nxt render for autocad.I just retouched it and increased the resolution.
Dec 20, 2023
OYEBANJI EMMANUEL posted a photo

Render 1

This is a remake of one of Peter Milner's renders.I dont have the file. I photo-matched the scene in sketchup and rendered with nxt render in autocad.I replicated it.
Dec 18, 2023
OYEBANJI EMMANUEL posted a photo

00001 copy

An office render i did recently.Critics and comments are welcome.Its one of the frames of a walkthrough animation i did recently.I used sketchup to model, exported to autocad and rendered with nxt render.
Nov 22, 2023
OYEBANJI EMMANUEL posted a discussion

nxt render Course/tutorial

Good day Sir,I want to know the number of people that would be interested in a nxt render course because i plan to create one.Please send me a prompt reply if you are interested.Just sayHi am in.Checkout a walkthrough i just created recently with nxt render for autocad after modelling in sketchup and then post-producing in photoshop.…See More
Nov 5, 2023
OYEBANJI EMMANUEL replied to N` Goraw's discussion ACCURENDER NXT FOR WALKTHROUGHS
"Good day Sir, Hope this message meets you well. I just completed a short walkthrough of an office. Its down here https://drive.google.com/file/d/1L4p5Iyiq5MiSK137UT1eH3POuiI5ZLDA/view?usp=drive_link"
Nov 5, 2023
Maciej posted photos
Jun 6, 2023
Marko Stout replied to Peter Milner's discussion Comotion
"Is comotion still om progres? I need to make some moving parts in NXT!!"
Apr 7, 2023
Maciej commented on Maciej's photo
Thumbnail

v2

"Ok, give me couple of days, I'll try to work out the video tutoriał with mapping procedure. For free.. :) Regards, Maciej"
Mar 20, 2023

© 2024   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service