"Found 'Textured Mesh Support' only works with obj and 3ds Files which do not contain PBR Maps.
To 'obj' converted newer 3ds do not render in nXt :-("
advanced rendering for AutoCAD
I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
I OPEN A 3D DRAWING IN AUTOCAD 2010 IT CRASH WHILE RENDERING WITH ACCURENDER.
Views: 450
- Attachments:
Replies to This Discussion
-
Permalink Reply by Roy Hirshkowitz on
-
If it's crashing consistently with a particular drawing, let me know, there may be a problem. Please don't use all caps when composing forum messages.
-
Permalink Reply by norton torres on
-
yes... is every 3d model that I I import from autocad 2018 to autocad 2010 and it dosent matter that I convert the drawing in trueview to dwg 2010 it continues the error, it happens this way, I open the drawing in autocad 2010 then I open accurender to render the drawing and then it gives me the error.
- Attachments:
-
-
Interesting. I'm not sure what I can do about it-- the oldest AutoCAD I have available for testing is 2013. AutoCAD 2010 is actually 12 years old which is an eternity in software. You can try sending me a simple converted drawing (2010 .dwg) that you verify is crashing and I'll take a look at it. I'm not too optimistic, though.
-
-
One additional thought.
A known issue when saving drawings to a previous version is that nXt must be loaded and running before you convert the drawing. Try the following:
1. Open your 2018 drawing in AutoCAD.
2. Start nXt by typing "nXt" or however you normally start it.
3. Save the drawing to a previous format such as 2010.
See if this procedure prevents the crash.
-
Permalink Reply by George Ioannidis on
-
I think Norton mentioned that he did the conversion using TrueView, not the AutoCAD itself. He is still on ver. 2010 I suppose, otherwise he could do renderings directly in 2018. Maybe TrueView isn't quite versionwise correct as regards to conversions of 3D drawings from the newer to the older versions DWG, who knows :)
-
-
I'm guessing it's the same problem. nXt has to be present for a conversion to work properly with a drawing that has nXt data. That's a known issue. Converting using any other method probably will not work properly if you need to use nXt on the converted drawing.
Search
Translate
Latest Activity
OBJ Plant Issue - Diffuse Maps
Hi to anyone;maybe a similar issue as Mr.Holz announced recently, (PBR Texture question):-added a obj. plant via 'Textured Mesh Objects' widget-reassigned maps (materials showed up, but with no maps attached, (although mtl. files are in the same folder as corresponding maps and obj files)-tried to render (see 'result')So my question is: Does anybody knew about how to handle Diffuse Maps in nXt, i suspect there is no interpretation of the UV-Coordinates?Any hints and help kindly appreciated!…See More
corten_pavillon_22mm_1
"Thanks for your kind words.
Yes, all plants are generated with nxt plant-editor.
I have used leaves from Marc Chaumier's plant library.
(Download/ Content + Entourage)"
corten_pavillon_22mm_1
"Very nice piece. Brilliant work.
Are all these plants nxt render plants ?
They look very good. Ground cover is so thoughtful."
"Thank you so much."
"Sorry, do not exactly how to do it right.
If i sent you one or sets, could you "compose" one material as an example?
Maybe this is interesting for others too.."
"Thanks Rich,
exacvtly what i found out.
Only did't know what to dfo with the AO map.."
© 2026 Header image courtesy Peter Milner
Powered by
