"Since there is no Ambient Occlusion Slot in 'Texture Set' Mode of the nXt-Material Editor,
I found another way around what to do with AO Maps:
Baking it into Diffuse; e.g. Multiplying AO Map over Diffuse/Albedo/Colour in…"
advanced rendering for AutoCAD
Problem to setup Accurender from CD-rom
I have a problem with the set up off Accrender from my CD-rom. In the past I had Windows in a 32-bit version on my computer now I have a 64-bit version of it and also of AutoCAD 2012.
How can resolve the problem. See also attached file
Views: 228
- Attachments:
Replies to This Discussion
-
Permalink Reply by Roy Hirshkowitz on
-
You can't. AccuRender 4 is 32 bit only. You'll need to try nXt which has both 32 and 64 bit versions.
-
Permalink Reply by akinlolu olugboji on
-
Still go on right away and install only you will earlier versions of AutoCad too I believe up to 2008 for it to work, but the stability cannot be guarantee. So you still need to go the way of Roy's advise and move up to AR5.
-
Permalink Reply by Manuel Corbet on
-
I've been able to install Accurender nXt. But it's very different from Accurender 4. Does someone has a user manual?
-
Permalink Reply by Peter Milner on
-
You can find all the help you need on this site.
Click on Support - Help and tutorials to get you started. Then use this forum for any specific questions or advice.
Once you get the hang of nXt, you won't be going back to AR4 as the results are much better and the setting up is far simpler.
-
-
Here is a good place to go also the webminar on getting started with Nxt is there also.
Search
Translate
Latest Activity
V1x copy
"The wooden texture of the TV-Console looks quite decent.
The Wallpaper on the left has an interesting structure, maybe it would look even better, if you make the texture seamless + applying a little bit of depth, e. g. with highpass - filter in PS?"
"Thank you for help on this topic!
Will test 'Automesher LT' (developed by Automapki), if I run into troubles again.
[Sometimes I was wondering about, if this forum is still alive... .]"
"Good day,
I searched the former forum posts and found another option to solve this problem which is another plugin to autocad-----AUTOMAPKI. You can give it a try."
Thallasso_Pre_Study_2_50mm
3ds +obj import works for older files-'xfrog-plants', for instance... .Comments + Critics appreciated!Hopefully accurender still survives!
"Found 'Textured Mesh Support' only works with obj and 3ds Files which do not contain PBR Maps.
To 'obj' converted newer 3ds do not render in nXt :-("
© 2026 Header image courtesy Peter Milner
Powered by
