AccuRender nXt

advanced rendering for AutoCAD

Hi Rich and Roy, I think i will need to format my hard disk from my PC, When I reinstall NXt how I do to use my license? I d'ont want to use my seond license numbre bcase i will install this license later on my laptop. Thanks in addvance.   Alejandro

Views: 256

Reply to This

Replies to This Discussion

Is it a (new) Render Plus licenses or a legacy McNeel license?

Hi Roy, is a  render Plus license

Thanks-- I'll get Rich to chime in here.

If you are renaming your computer when you format the drive, use the Replace Unused Computer on the RPS License dialog to remove the old computer name from our database and authorize nXtRender with the new computer name.

Otherwise, just open the RPS License dialog and enter your license number and click on Check License and Validate.

If you have any problem, use the "Report Problem..." button to send us an email to make the switch here, and send you a new authcode.

Thanks Rich.

RSS

Search

Translate

Latest Activity

Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"Thanks, I'll check on the first two.  The third is normal behavior-- data conversion stops when the arstudio data is detected.  There is a command to remove the arstudio data which would allow you to start from scratch-- probably not…"
Apr 19
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"Two things don't seem to translate from nXt: Procedural bump and orientation of texture in a material.   Also, if a decal is changed using nXt, Studio continues to display the original decal. Editing the decal in the Studio material pallet…"
Apr 19
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"That sorted it - using the Studio camera and then selecting "Get AutoCAD view"."
Apr 19
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"Interesting.  ArStudio has its own WalkAbout-like feture, it's the little camera button.  If you do it while the preview is running you should see the view changes automatically in the rendering."
Apr 19
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"I'm having trouble getting the desired view in Studio. I've tried setting the view in nXt walkabout and then using that to set the AutoCAD view. However, when I render from Studio, it gives me something different (see images below)."
Apr 19
Roy Hirshkowitz replied to Peter Milner's discussion Multiple cores
"There should be an Update Manager in the Start menu.  Grab and install 0267.  If this doesn't work I'll send a link."
Apr 16
Peter Milner replied to Peter Milner's discussion Multiple cores
"Okay. Just tried to install and run ArStudio, but I get this message inside AutoCAD:"
Apr 16
Roy Hirshkowitz replied to Peter Milner's discussion Multiple cores
"Sort of-- nXt has a hard-coded max of 32 but you get diminishing returns before than point.  If you go beyond 32 they can sometimes be used, depending on the load.  I guess I would still think of 32 as a practical limit. ArStudio should…"
Apr 12

© 2021   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service