corten_pavillon_22mm_1
"Thanks for your kind words.
Yes, all plants are generated with nxt plant-editor.
I have used leaves from Marc Chaumier's plant library.
(Download/ Content + Entourage)"
advanced rendering for AutoCAD
Run the software
Hi peaple, can someboby help me?
I have instaled in my computer a Windows XP, and a Autocad 2010.
I intal yesterday the Accurender nXt software, and it can´t run, I try again and again, and nothing.
How can I do to make it work.
Views: 553
Replies to This Discussion
-
Permalink Reply by Chas / Aug Posekany on
-
I believe if it is a fresh installation you will need to appload the arx file before it will run nxt. Once this is done it does not have to be done again even after software updates.
-
Permalink Reply by akinlolu olugboji on
-
I thought the newer release of nxt was suppose to self register. So you only need to type nxt in QutoCqd zithout the need to qppload:
-
Permalink Reply by Decio Baptistucci on
-
I do this, and it is running.
Thanks.
-
-
After installing; launch AutoCad and type
nxt
-
Permalink Reply by Roy Hirshkowitz on
-
What have you tried so far? Be very specific. For example-- I typed "nXt" and got an error message.
-
Permalink Reply by Alfons Akamp on
-
Hallo Roy
Wenn ich in AR5 beim Start "nXt" eingebe, passiert garnichts ausser eine Fehlermeldung. Ich muss AR5 immer über den Befehl "AR5" starten und dann funktioniert das auch.
Grüsse
Akamp
-
-
Didn't quite understand that.
Does it work when you type "ar5" and not work when you type "nxt"?
Please send the error message.
-
-
No I tipe "nxt", but I discovered that the problem was that the Autocad can´t find the ARX arquives. So I went to the browser menu, opem the toll box, then open the "load applications", and load all arquives with AR extentions that I find into the Accurender nXt software.
It could be mad, but works.
Asking your question, the message that apear before was; "press F1 for help".
-
-
Thanks Decio-- that's actually a question for Alfons-- not sure why yours didn't auto-register-- we'll keep an eye on that.
-
-
Hallo Roy
Egal welches Build ich bis jetzt hatte, ich muss beim Start von AR5 immer "AR5" eingeben sonst funktioniert es nicht. Dabei ist es egal ob ich 32 Bit oder 64 Bit hier habe. Wenn ich "xNt" eingebe startet AR5 nicht.
Bitte nicht fragen, warum, es ist einfach so. Ist das jetzt ein Fehler (Bug) oder nicht??
Grüsse
Akamp
-
-
It's certainly a problem. Try "_nxt". Let me know the build # reported in the About box.
-
Permalink Reply by Jan Verzelen on
-
I had the same problem which we discussed in "pathtracer sky" topic. I want to put a link on this but i have no idea how to do that here.
Search
Translate
Latest Activity
corten_pavillon_22mm_1
"Very nice piece. Brilliant work.
Are all these plants nxt render plants ?
They look very good. Ground cover is so thoughtful."
"Thank you so much."
"Sorry, do not exactly how to do it right.
If i sent you one or sets, could you "compose" one material as an example?
Maybe this is interesting for others too.."
"Thanks Rich,
exacvtly what i found out.
Only did't know what to dfo with the AO map.."
"nXtRender doesn't use the AO texture image settings for anything, so don't bother trying to use that.
I would start use the Diffuse textures at 100% and experiment with the levels of the Specular Reflection.
You might need to toggle the…"
"Hi,i imported some old Dosch 3D plants in nxtRender for testing, fully textured without an issue.
Also used some free sketchup tree models (*.skp) from sketchuptextureclub and opened them in sketchup, exportet them to *.obj and used them in…"
© 2026 Header image courtesy Peter Milner
Powered by
