AccuRender nXt

advanced rendering for AutoCAD

hello to all
I'm doing my first render interior, I wanted some advice from you, how to improve the lighting and views.

Hello and thanks for the answers

Views: 1157

Attachments:

Reply to This

Replies to This Discussion

other views

Attachments:

A good start.

Most of the materials are quite flat and could do with a small amount of soft sheen or reflection (use glossy if you're rendering with the basic engine).

The lighting is very uniform. If possible, try to use a variety of lighting, set them on different channels and then play with the balance after the rendering is done.

Go here! and here too!

Those are two past forum threads that can help.

thanks, now I do the tests and then I'll show you

You are welcome.



roberto sacchetti said:

thanks, now I do the tests and then I'll show you

Hi all
I'm continuing my work inside, I put the glossy materials;

I was now putting the spotlight, except that when I render it out!!

why??

I can post a standard configuration for an internal render?

Attachments:

hI, first of all check your autocad units, if this is correct put your model near the WCS 0,0,0, sometimes when you are far away from the origin you get  very strange results. If ypu want post the drawing and I take a look , regards,

Alejandro

i think the same...

This looks like something else-- objects on a frozen layer, etc..  Send or upload the drawing when you can.

I may have solved, it was a simple error 3DFACE that had stuck to the light and you could see when I copied!!

now I've done it a try.

what do you think??
you have any advice?

Attachments:

My take as learnt from the guru himself of internal Nxt render in person of Peter Miller. Remove the furniture and render the walls, curtails (if in front and external lights contribute ) ceiling and floor. When you got this right (as less things to render the faster the engine goes) add the furniture one at a time and render. So add the single seater  tweak material and render, till ok, then add the cushions and do same this takes care of all other similar furniture. Then move on to the centre coffee table (be sure the other furniture are frozen, then the kitchen cabinet and so on till you have gone through all. The add all hit the render button and go to sleep, take a coffee break and if you have access to another pc do something else. 

roberto sacchetti said:

I may have solved, it was a simple error 3DFACE that had stuck to the light and you could see when I copied!!

now I've done it a try.

what do you think??
you have any advice?


Here is a good source of free furniture to down load.
akinlolu olugboji said:

My take as learnt from the guru himself of internal Nxt render in person of Peter Miller. Remove the furniture and render the walls, curtails (if in front and external lights contribute ) ceiling and floor. When you got this right (as less things to render the faster the engine goes) add the furniture one at a time and render. So add the single seater  tweak material and render, till ok, then add the cushions and do same this takes care of all other similar furniture. Then move on to the centre coffee table (be sure the other furniture are frozen, then the kitchen cabinet and so on till you have gone through all. The add all hit the render button and go to sleep, take a coffee break and if you have access to another pc do something else. 

roberto sacchetti said:

I may have solved, it was a simple error 3DFACE that had stuck to the light and you could see when I copied!!

now I've done it a try.

what do you think??
you have any advice?

RSS

Search

Translate

Latest Activity

Tom Jarvi posted photos
Mar 12
OYEBANJI EMMANUEL posted a photo

Render 1 copy (1)

This is a remake of one of Peter Milner's scenes. I dont have the file. I photo-matched it in sketchup and rendered in nxt render for autocad.I just retouched it and increased the resolution.
Dec 20, 2023
OYEBANJI EMMANUEL posted a photo

Render 1

This is a remake of one of Peter Milner's renders.I dont have the file. I photo-matched the scene in sketchup and rendered with nxt render in autocad.I replicated it.
Dec 18, 2023
OYEBANJI EMMANUEL posted a photo

00001 copy

An office render i did recently.Critics and comments are welcome.Its one of the frames of a walkthrough animation i did recently.I used sketchup to model, exported to autocad and rendered with nxt render.
Nov 22, 2023
OYEBANJI EMMANUEL posted a discussion

nxt render Course/tutorial

Good day Sir,I want to know the number of people that would be interested in a nxt render course because i plan to create one.Please send me a prompt reply if you are interested.Just sayHi am in.Checkout a walkthrough i just created recently with nxt render for autocad after modelling in sketchup and then post-producing in photoshop.…See More
Nov 5, 2023
OYEBANJI EMMANUEL replied to N` Goraw's discussion ACCURENDER NXT FOR WALKTHROUGHS
"Good day Sir, Hope this message meets you well. I just completed a short walkthrough of an office. Its down here https://drive.google.com/file/d/1L4p5Iyiq5MiSK137UT1eH3POuiI5ZLDA/view?usp=drive_link"
Nov 5, 2023
Maciej posted photos
Jun 6, 2023
Marko Stout replied to Peter Milner's discussion Comotion
"Is comotion still om progres? I need to make some moving parts in NXT!!"
Apr 7, 2023

© 2024   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service