AccuRender nXt

advanced rendering for AutoCAD

Ron Eddy's Discussions (20)

Discussions Replied To (13) Replies Latest Activity

"if you mean the lampshade material, here's the definition (anything not listed is le…"

Ron Eddy replied Jul 17, 2014 to maximum cores usable?

10 Jul 18, 2014
Reply by Roy Hirshkowitz

"The file is 22.5 MB - I can cut stuff out of it to get it down to 5MB but it's possi…"

Ron Eddy replied Jul 17, 2014 to maximum cores usable?

10 Jul 18, 2014
Reply by Roy Hirshkowitz

"Ok, I don't get something.  For the sake of experiment, I ran three versions of the…"

Ron Eddy replied Jul 16, 2014 to maximum cores usable?

10 Jul 18, 2014
Reply by Roy Hirshkowitz

"UCSFOLLOW it was!  A system variable carried in the drawing. Thank You SO much!  It…"

Ron Eddy replied Mar 22, 2013 to Autocad 2013, decals, and automatic view switching

5 Mar 22, 2013
Reply by Garret Diduck

"Ok, I'll try some other examples and see what happens.   Any idea why the -farmed ve…"

Ron Eddy replied Dec 7, 2011 to FARM Operation

4 Dec 8, 2011
Reply by Garret Diduck

"the background in the attached image is offset about 0.35 in the Y direction, to bri…"

Ron Eddy replied Nov 26, 2011 to Background Image Fatal Error

4 Nov 26, 2011
Reply by Ron Eddy

"works great.  also the x and y offsets work (they didn't).  thanks very much Roy"

Ron Eddy replied Nov 26, 2011 to Background Image Fatal Error

4 Nov 26, 2011
Reply by Ron Eddy

"What I've been doing seems to work fairly well.  First decide what ratio the renderi…"

Ron Eddy replied Dec 21, 2010 to Camera Controls !!!

27 Dec 28, 2010
Reply by Eric B

"it seems some of my nested blocks were mirrored. changing the X-value to 1.0 instead…"

Ron Eddy replied Nov 28, 2010 to blocks and decals

21 Nov 29, 2010
Reply by Roy Hirshkowitz

"using double sided decals seems to have fixed it. they're not mirrored, simply rotat…"

Ron Eddy replied Nov 22, 2010 to blocks and decals

21 Nov 29, 2010
Reply by Roy Hirshkowitz

RSS

Search

Translate

Latest Activity

Daniel Hargreaves posted a discussion

Accustudio

I know this is hard to believe, but Accustudio is over 20 years old. It has been quiet for a couple of years now at the site. I'm looking to hand it off to the next generation. Is there anyone interested in working on the site and eventually taking over the ownership of it?See More
Tuesday
Roy Hirshkowitz replied to Peter Milner's discussion AR Studio texture editing
"Currently only one texture per component and one bump map.  There is a blended material which allows more complex permutations-- most people do texture blending in photoshop. Solid textures refer to the granite/marble/wood procedural…"
Monday
Roy Hirshkowitz replied to Peter Milner's discussion AR Studio testing
"Yes, it will be different.  Typing arstudio should be roughly the same operation as "running a quick test render"-- it may be a little slower, and the first time you type it, it will certainly be slower (it was before). …"
Monday
Peter Milner replied to Peter Milner's discussion AR Studio texture editing
"A further question: What is a solid texture?"
Nov 28
Peter Milner replied to Peter Milner's discussion AR Studio texture editing
"Okay. Another question on textures: In nXt you can layer different textures and bump maps to create a more complex material. For example, the Oak veneer material (image attached) uses two bump maps: one for the grain and one for the flecks. In…"
Nov 28
Peter Milner replied to Peter Milner's discussion AR Studio testing
"It's more that, when putting a render together, I work on the model, run a quick test render, go back to the model to adjust/add things, run a quick test render etc etc. Having to close studio down and then re-open it every time I want to…"
Nov 28
Roy Hirshkowitz replied to Peter Milner's discussion AR Studio texture editing
"For AutoCAD I don't think you need to manipulate this-- leaving it alone should work.  It's there for other applications (Rhino, Sketchup, etc.) which permit multiple sets of texture coordinates on the same mesh-- native AutoCAD…"
Nov 27
Roy Hirshkowitz replied to Peter Milner's discussion AR Studio testing
"There's an autocad command for tagging objects as lights-- it's called something like arstudiolight-- I'll check. ***** You can start an out-of-process final rendering and close ArStudio down and continue to work without shutting the…"
Nov 27

© 2019   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service