accurender version 1.0.354

[norton torres]

why I cant use accurender version 1.0.354 in autocad 2018

[norton torres]

[Rich Hart]

Normally, nXtRender registers its commands with AutoCAD during installation. On occasion, this mechanism may fail. In this case you will need to manually load nXt the first time you run it in a particular version of AutoCAD.   Use the following procedure: Type _appload at the command line. Navigate to the folder where nXt was installed. This is normally C:\Program Files\AccuRender nXt Select one of the following files depending on your platform: AccuRender nXt.arx -OR- AccuRender nXt64.arx (AutoCAD 2007 – 2009) AccuRender nXt_18_.arx -OR- AccuRender nXt_18_64.arx (AutoCAD 2010 – 2012) AccuRender nXt_19_.arx -OR- AccuRender nXt_19_64.arx (AutoCAD 2013 – 2014) AccuRender nXt_20_.arx -OR- AccuRender nXt_20_64.arx (AutoCAD 2015 - 2016) AccuRender nXt_21_.arx -OR- AccuRender nXt_21_64.arx (AutoCAD 2017) AccuRender nXt_22_.arx -OR- AccuRender nXt_22_64.arx (AutoCAD 2018) AccuRender nXt_23_.arx -OR- AccuRender nXt_23_64.arx (AutoCAD 2019 - 2020)             Press Load   For example, you should be able to load the one named AccuRender nXt_22_64.arx for AutoCAD 2018 or AutoCAD Architecture 2018, on a 64 bit computer.   Check the AutoCAD command line to verify that the application loaded without error. At this point you should be able to type nxt or ar5 to launch the application. You should not have to repeat this procedure again for this version of AutoCAD. Simply typing nxt or ar5 at the command prompt should cause nxt to load. You may need to repeat this procedure if you install another version of AutoCAD.

[norton torres]

NO 22

...

[norton torres]

ok...

the RPS_nXtRender_R22_x64 sudenly is there... magic..!!

thanks HART.... I JUST DOMLOAD AGAIN AND REBOOT...