"I meant Chris Fox, not David."
advanced rendering for AutoCAD
accurender version 1.0.354
Replies to This Discussion
-
Permalink Reply by norton torres on
-
-
Permalink Reply by Rich Hart on
-
Normally, nXtRender registers its commands with AutoCAD during installation. On occasion, this mechanism may fail. In this case you will need to manually load nXt the first time you run it in a particular version of AutoCAD.
Use the following procedure:
- Type _appload at the command line.
- Navigate to the folder where nXt was installed. This is normally C:\Program Files\AccuRender nXt
- Select one of the following files depending on your platform:
- AccuRender nXt.arx -OR- AccuRender nXt64.arx (AutoCAD 2007 – 2009)
- AccuRender nXt_18_.arx -OR- AccuRender nXt_18_64.arx (AutoCAD 2010 – 2012)
- AccuRender nXt_19_.arx -OR- AccuRender nXt_19_64.arx (AutoCAD 2013 – 2014)
- AccuRender nXt_20_.arx -OR- AccuRender nXt_20_64.arx (AutoCAD 2015 - 2016)
- AccuRender nXt_21_.arx -OR- AccuRender nXt_21_64.arx (AutoCAD 2017)
- AccuRender nXt_22_.arx -OR- AccuRender nXt_22_64.arx (AutoCAD 2018)
- AccuRender nXt_23_.arx -OR- AccuRender nXt_23_64.arx (AutoCAD 2019 - 2020)
Press Load
For example, you should be able to load the one named AccuRender nXt_22_64.arx for AutoCAD 2018 or AutoCAD Architecture 2018, on a 64 bit computer.
Check the AutoCAD command line to verify that the application loaded without error. At this point you should be able to type nxt or ar5 to launch the application. You should not have to repeat this procedure again for this version of AutoCAD. Simply typing nxt or ar5 at the command prompt should cause nxt to load. You may need to repeat this procedure if you install another version of AutoCAD.
-
-
NO 22
...
-
-
ok...
the RPS_nXtRender_R22_x64 sudenly is there... magic..!!
thanks HART.... I JUST DOMLOAD AGAIN AND REBOOT...
Search
Translate
Latest Activity
CAN WE GET PETER MILNER TO TRAIN SOME OF US FOR A TOKEN ?
Good day, forum members,I was thinking that we could each, if interested, contribute a significant token to give Peter Milner and David to train us virtually in nxt render for Autocad. Am not sure he still uses it but the experience he has spanning over 20 years cannot be underestimated. I wish the forum co-ordinators could look into this. So that more of us will produce realistic renders with the paid version of nxt render and we will be able to encourage other users of other more advanced…See More
LIGHT STREAKS IN ACCURENDER STUDIO
Good day everyone.Does anyone here know how to create light streaks in ACCURENDER studio or in nxt render ? Please share your knowledge with me. Light streaks for interior ceilings in the p.o.p works and under, a t.v console. See More
3D_Replication final
I created this replication of one of Peter Milner's renders, not with AI but with sketchup (with the matchnewphoto tool), autocad and nxtrender.Critics and comments are welcome.
My V.R Panorama Project
Good day everyone.I have been working for sometime on a V.R panorama project. Its a personal project. I used sketchup to model and imported it into arstudio and rendered 6 panorama views at 3k pixel.Check it out here…See More
© 2025 Header image courtesy Peter Milner
Powered by
