AccuRender nXt

advanced rendering for AutoCAD

Okay, a couple more questions.

When AR Studio is running inside AutoCAD, I can't work on the CAD model unless I close Studio down. Is this correct behaviour?

How do I add a new light in Studio? I can edit existing nXt ones, but can't see how to add a brand new light source.

Views: 58

Reply to This

Replies to This Discussion

Just tried tweaking the view of the render and now the pre-render preview doesn't match the preview during rendering (see screen shots below).

Okay. It appears to only match for the original window size when Studio is launched.

Changing the window size from large to small, or vice versa causes a mismatch.

I'll see if I can reproduce-- thanks.

There's an autocad command for tagging objects as lights-- it's called something like arstudiolight-- I'll check.

*****

You can start an out-of-process final rendering and close ArStudio down and continue to work without shutting the rendering.  It's on the Destination popdown of the Render tab.  I think this is what you mean.

It's more that, when putting a render together, I work on the model, run a quick test render, go back to the model to adjust/add things, run a quick test render etc etc.

Having to close studio down and then re-open it every time I want to change something greatly slows the process down.

I've never used AutoCAD directly for any rendering stuff - lights, cameras, textures etc. I've always done it through Accurender. Looks like I'll have to learn something new.

One other point: I find the render window navigation very clunky, as to navigate you have to keep clicking on different buttons for different types of movement. The nXt walkabout worked extremely well as you could control your view with just the mouse (left button-swivel left/right/up/down, right button - move left/right/up/down, scroll wheel - move forwards/backwards).

Yes, it will be different.  Typing arstudio should be roughly the same operation as "running a quick test render"-- it may be a little slower, and the first time you type it, it will certainly be slower (it was before).  Hopefully, it will make up for that with the immediate feedback you get on material changes, etc..

The few additional commands are not really "using AutoCAD directly"-- they're my commands.  They can be easily located on a palette and/or toolbar that says "AccuRender Studio" on it.

If you select the pointer tool on the render window (it's selected by default), the right mouse button and the scroll wheel gives you access to all the navigation functions like before.  Using the shift and ctrl keys modify these for panning and walking respectively.

RSS

Search

Translate

Latest Activity

Rich Hart replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"I see that if I turn the soffit layer off, that those can lights on the right are working. So I assume the soffit is blocking the light. Unfortunately, I'm not able to try moving the can lights down for some reason. I can try looking into this…"
12 hours ago
Brittany Watson replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"I apologize, they are the smaller can lights on right soffit side of the arched ceiling, the bigger ones on the opposite side (left) are working correctly. They do work when the light source is pulled out of the can object or out of the soffit, so…"
15 hours ago
Rich Hart replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Unfortunately, the model was still just too large for my machine. After about 15 minutes I had to turn off the computer so that I could do something else while it was rendering.. Could you give me any idea of where the lights are that don't…"
15 hours ago
Brittany Watson replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Just sent. Thank you for the quick response!"
19 hours ago
Rich Hart replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Can you send us a model where this is happening, to see if we can duplicate it here? As small a model as possible would be appreciated. You can use this link to send it to us: https://renderplus.com/wp2/uploads/ Thanks, Rich"
yesterday
Brittany Watson posted a discussion

Continuous Recessed Lighting Issues

Hi I use AutoCAD Architecture and have been having on going problems with a recessed can light block. I have completed 3 renderings now in which I have had to spend days trying to get my recessed lighting to work. Other lights work, and occasionally some of the can recessed lights will show up. I have exploded the block and added them individually, I have aimed the light and rotated it every which way, but most of the time nothing works.  I have tested out the problem on my current rendering…See More
yesterday
Roy Hirshkowitz replied to Peter Milner's discussion Accurender Studio cloud rendering
"I pulled the option to use my Azure Batch cloud out of the current product.  There wasn't much interest in it.  You can set up your own Azure account with Microsoft and use it, it's not trivial but also not too hard.  I…"
Feb 21
Peter Milner posted a discussion

Accurender Studio cloud rendering

How much does it cost to use cloud rendering?See More
Feb 21

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service