AccuRender nXt

advanced rendering for AutoCAD

I have a few blocks with decals attached that are not rendering with the decals.  I added the decal to the part, made it into the block, and the rendered block does not show the decal.  If I explode the block before rendering the decal does show up.  Any idea what is up with that?  I always had decals in my blocks in AR3 and never had to explode them that I can remember. 

Views: 276

Reply to This

Replies to This Discussion

Like I said, I'm happy to take a look at the model or a simplified model which illustrates some problem with nesting blocks or light sources. So far I really don't have much to go on-- and no known issues.
I included a simplified model in one of my previous posts called render blocks test.dwg.
Thanks-- I missed it. I also, of course, missed the fact that I'm talking to two different users at once-- likely with different problems. Another cup of coffee may be required.
I'll need the decal file as well-- or at least its name-- before I can test.
Never mind-- I found the name internally and was able to reproduce.

Brian-- I'm pretty sure this is a precision problem. For the smaller monitors, the screen is a box with a thickness of 0.005 inches and sits right on another surface. This about 1/10 of a millimeter which may be too small a distance to resolve on your particular model, where the dimensions are on the order of 100 ft or more. This would explain the intermittent nature of the problem, as well as the fact that instancing the screen inside of a block might easily make the precision problem even worse.

I'd recommend drawing the screen as a 3dface rather than a solid-- this will make it easier to apply the decal correctly. I would definitely give it more separation from the underlying solid. The larger monitors use 0.05 inches-- about 1 mm-- which seems to work better.
Hmmm, wont let me reply to your most current reply.

Could be a precision problem, but seems like it is more of an issue for me and the others with inserting multiple instances of the same block. By just deleting the group of monitors on the left the ones on the right start working correctly again. Before I deleted the rest of the model and the other two rooms that had the same monitors the big monitor had the same problem.
nXt instances the blocks after you insert a certain number of copies-- something like 4 or 5-- can't quite remember. Instancing means that I keep only one copy of the geometry just like AutoCAD. This can make precision problems worse. By deleting stuff you may have cut the number of blocks below the instancing threshhold. Precision problems also tend to be very intermittent-- changing the viewpoint or altering the scene geometry can make a big difference.

I did just verify that decals are working generally for instanced blocks. The drawing below has a bunch of blocks-- enough to trigger instancing. Changed the orientation of one of them.

it seems some of my nested blocks were mirrored. changing the X-value to 1.0 instead of -1.0 and rotating as needed took care of it.

thanks
As far as I (currently) know, mirroring should only be a problem WRT some special cases. Decals, of course-- I have my suspicions that displacements will get screwed up as well-- there may be more. There may be something I can do about it-- it's on the list to revisit.

RSS

Search

Translate

Latest Activity

Peter Milner replied to Peter Milner's discussion RenderFarm passes and tasks
"Hi Rich, That could be the answer. We have a new designer working at one of our other sites and she may have started a drawing from scratch instead of using a template. Therefore it would be set to use the standard rendering engine. Thank you for…"
10 hours ago
Rich Hart replied to Peter Milner's discussion RenderFarm passes and tasks
"Is the rendering engine set t be the Path Tracer on that machine? I see it is disabled on my computer if the engine is set to Standard. http://accurender.ning.com/forum/topics/tasks-in-render-farm-window"
10 hours ago
Peter Milner posted a discussion

RenderFarm passes and tasks

Got a strange glitch here.On one of our PCs, when sending a render to the Farm, the option to change the number of tasks is greyed out and stuck on 10. However, when a job is sent to the farm, it is automatically broken into 25 tasks.The PC is running the latest versions of nXt and the Farm and has been working perfectly up to  now.Any ideas?See More
15 hours ago
Peter Milner commented on Peter Milner's photo
Thumbnail

screend brochure 2019 05

"You may be right on the bricks. What looks like noise is actually the texture of the fabric."
15 hours ago
George Ioannidis commented on Peter Milner's photo
Thumbnail

screend brochure 2019 05

"Those are all exceptional work, Peter! Congratulations!On this one only: bricks look big to me, but maybe I am wrong. Also some areas in shadow look still a bit noisy."
Oct 16
Peter Milner posted photos
Oct 15
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"1-  On the Rendering Tab there is a popdown called Destination.  The option is called something like "Local Out of Process".  2-  No, installation will require admin access."
Oct 5
Mark Brinkman replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"I am an old Accurender user. I now need to try and re-create some old images from old models. (about 20 years old) I have now downloaded Accurender Studio, and now work with AutoCAD 2016 and 2017 I have 2 questions related to Accurender Studio: 1)…"
Oct 4

© 2019   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service