AccuRender nXt

advanced rendering for AutoCAD

I realise this has been requested numerous times in he Forum, but is there any chance of getting camera control buttons back in NXT? I'm doing more and more photo-montages and not having the precise control as in the walkabout window of AR4. Using the camera controls in AutoCAD is not much better. I used to be able in AR4 to camera match in a matter of minutes, whereas yesterday, it took me all day and it's still not right! Even pulling down the increment slider and using the arrow keys does not help.

If anyone has any suggestions it would be greatly appreciated.

Views: 127

Reply to This

Replies to This Discussion

Hi Paul,

this is a very important issue to me as me as well I do a lot of photomontages. I suggested the developers to find a comfortable solution to camera match several times with no response. Anyway, I generally proceed like this: I make a copy of the background image at low resolution and in greyscale in order to have a smaller image for the walkabout window to manage. Then I make a very simple solid on a separate layer of the building that I'm going to render just for the same reason: increasing the speed of walkabout window. Save the view. Change the background image with the original one (or post-production in PS), visualize all the layers to be rendered, and render.

I have to admit that with bonzai3D (see Match View) it's a pleasure to make camera match, and if you save views they remain the same when importing back the model into ACAD.

Thanks for the prompt response. Glad I'm not the only one having problems with camera matching. That Bonzai3D looks promising as a way to camera match, shame it's another $500, although I see there's a trial version.

The keyboard arrows should work a lot like the old buttons.

RSS

Search

Translate

Latest Activity

Rich Hart replied to Paul Jackson's discussion Bricscad
"Unfortunately, we don't have a version that works with BricsCAD now, and that older trial version cannot be reinstated."
Jun 19
Alfons Akamp replied to Paul Jackson's discussion Bricscad
"Ich habe hier auch eine nxtrender Version für Bricscad 15. Die sieht anders aus, als die von Acad. Leider ist auch bei mir der Testzeitraum schon lange abgelaufen. Gibt es die Möglichkeit mir eine Testlizenz dafür zuzuschicken??…"
Jun 19
George Ioannidis commented on Chris Fox's photo
Thumbnail

Bedroom

"Another good rendering. Those two photoshopped reading lights are not looking good though. They don't follow the perspective, the left one is higher than the right one. Also, they are supposed to be turned on (judging from the light on wall…"
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Single Family Home

"Great image as always. I would just blur the tree shadow on the lawn to match soft shadows on the building. Nice blending of cut-out greenery. Excellent job."
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Railroad kitchen

"Very nice rendering Chris! The only thing that distracts me is the fruit bowl. It's too evidently pasted in PS.  Another thing (nothing to do with rendering) is the microwave above the stove. I would rather expect a cooker hood there."
Jun 15
akinlolu olugboji posted a discussion

trim and extension command

On AutoCad 2021.The trim and extension command works funny. I initiate the command then click the cutting edge (press entre) then click the lines I need to trim or extend.Now I initiate the command and as soon as I click the object selected trims or extend.  How can I correct this, it is really affecting my work?See More
Jun 14
Chris Fox posted photos
Jun 12
ebenezer attah koomson posted photos
Jun 3

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service