AccuRender nXt

advanced rendering for AutoCAD

This is where I am;

this is where am going, how do I get there using HDRi sky with Path Tracer or any other method

Views: 1221

Reply to This

Replies to This Discussion

Using the Aloha.dwg as a test scence can you scenerio but with HDRi nd just plain sky/sun and vary combination with results and the actual model added to the tutorial section as a template for us newbies to take up from.

 

Also down to earth (no high level technical terms) tutorials on HDRi's would be appreciated, how to scale, orientation, know high quality ones, the right multiplier to use in terms of intensity, type etc  This is for Roy, anyone who can help.

 

Can you set up this scene with the aloha drawing attached to a tread in this post or get post this scene. This is for Peter as to the rendering he did with the *.hdr from hdri-location.com

Good discussion am just watching, yu guys are genius. pls akin that yur model where yu are going how did yu achieve that grass? is it groundcover?
Akin, did you do your hedges with groundcover tool?

This is not mine but what am trying to achieve with nxt.

To me, this is quite a poor rendering, not something to aspire to.

Going back to your own render; have you tried lowering the sun angle and increasing the cloudiness?

ok but from experience how can i achieve this grass(directly in front of the car) in modelling,
Akin, I think the sun is too high. Don't you never use manual settings?

So enquiries should be in reference to this.

 

I alway use manaul settings. Sun always high to reduce shadows and increase maxmium amount of light receieved by the scene.

 

Always welcome to new ideas. Use the attached drawing to set up.

Attachments:

I can't open the attachment.

Here it is again. It is also in the tutorial folder of the old AR3 CD.
Attachments:

RSS

Search

Translate

Latest Activity

Daniel Hargreaves posted a discussion

Accustudio

I know this is hard to believe, but Accustudio is over 20 years old. It has been quiet for a couple of years now at the site. I'm looking to hand it off to the next generation. Is there anyone interested in working on the site and eventually taking over the ownership of it?See More
Dec 3
Roy Hirshkowitz replied to Peter Milner's discussion AR Studio texture editing
"Currently only one texture per component and one bump map.  There is a blended material which allows more complex permutations-- most people do texture blending in photoshop. Solid textures refer to the granite/marble/wood procedural…"
Dec 2
Roy Hirshkowitz replied to Peter Milner's discussion AR Studio testing
"Yes, it will be different.  Typing arstudio should be roughly the same operation as "running a quick test render"-- it may be a little slower, and the first time you type it, it will certainly be slower (it was before). …"
Dec 2
Peter Milner replied to Peter Milner's discussion AR Studio texture editing
"A further question: What is a solid texture?"
Nov 28
Peter Milner replied to Peter Milner's discussion AR Studio texture editing
"Okay. Another question on textures: In nXt you can layer different textures and bump maps to create a more complex material. For example, the Oak veneer material (image attached) uses two bump maps: one for the grain and one for the flecks. In…"
Nov 28
Peter Milner replied to Peter Milner's discussion AR Studio testing
"It's more that, when putting a render together, I work on the model, run a quick test render, go back to the model to adjust/add things, run a quick test render etc etc. Having to close studio down and then re-open it every time I want to…"
Nov 28
Roy Hirshkowitz replied to Peter Milner's discussion AR Studio texture editing
"For AutoCAD I don't think you need to manipulate this-- leaving it alone should work.  It's there for other applications (Rhino, Sketchup, etc.) which permit multiple sets of texture coordinates on the same mesh-- native AutoCAD…"
Nov 27
Roy Hirshkowitz replied to Peter Milner's discussion AR Studio testing
"There's an autocad command for tagging objects as lights-- it's called something like arstudiolight-- I'll check. ***** You can start an out-of-process final rendering and close ArStudio down and continue to work without shutting the…"
Nov 27

© 2019   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service