AccuRender nXt

advanced rendering for AutoCAD

 I OPEN A 3D DRAWING IN AUTOCAD 2010 IT CRASH WHILE RENDERING WITH ACCURENDER.

Views: 39

Attachments:

Reply to This

Replies to This Discussion

If it's crashing consistently with a particular drawing, let me know, there may be a problem.  Please don't use all caps when composing forum messages.

yes... is every 3d model that I I import from autocad 2018 to autocad 2010 and  it dosent matter that I convert the drawing  in trueview to dwg 2010 it continues the error, it happens this way, I open the drawing in autocad 2010 then I open accurender to render the drawing and then it gives me the error.

Attachments:

Interesting.  I'm not sure what I can do about it-- the oldest AutoCAD I have available for testing is 2013.  AutoCAD 2010 is actually 12 years old which is an eternity in software.  You can try sending me a simple converted drawing (2010 .dwg) that you verify is crashing and I'll take a look at it.  I'm not too optimistic, though.

One additional thought. 

A known issue when saving drawings to a previous version is that nXt must be loaded and running before you convert the drawing. Try the following:

1. Open your 2018 drawing in AutoCAD.

2. Start nXt by typing "nXt" or however you normally start it.

3. Save the drawing to a previous format such as 2010.

See if this procedure prevents the crash.

I think Norton mentioned that he did the conversion using TrueView, not the AutoCAD itself. He is still on ver. 2010 I suppose, otherwise he could do renderings directly in 2018. Maybe TrueView isn't quite versionwise correct as regards to conversions of 3D drawings from the newer to the older versions DWG, who knows :)

I'm guessing it's the same problem.  nXt has to be present for a conversion to work properly with a drawing that has nXt data.  That's a known issue.  Converting using any other method probably will not work properly if you need to use nXt on the converted drawing.

RSS

Search

Translate

Latest Activity

Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"I'm guessing it's the same problem.  nXt has to be present for a conversion to work properly with a drawing that has nXt data.  That's a known issue.  Converting using any other method probably will not work properly if…"
Aug 23
George Ioannidis replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"I think Norton mentioned that he did the conversion using TrueView, not the AutoCAD itself. He is still on ver. 2010 I suppose, otherwise he could do renderings directly in 2018. Maybe TrueView isn't quite versionwise correct as regards to…"
Aug 21
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"One additional thought.  A known issue when saving drawings to a previous version is that nXt must be loaded and running before you convert the drawing. Try the following: 1. Open your 2018 drawing in AutoCAD. 2. Start nXt by typing…"
Aug 1
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"Interesting.  I'm not sure what I can do about it-- the oldest AutoCAD I have available for testing is 2013.  AutoCAD 2010 is actually 12 years old which is an eternity in software.  You can try sending me a simple converted…"
Aug 1
norton torres replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"yes... is every 3d model that I I import from autocad 2018 to autocad 2010 and  it dosent matter that I convert the drawing  in trueview to dwg 2010 it continues the error, it happens this way, I open the drawing in autocad 2010 then I…"
Jul 31
Roy Hirshkowitz replied to norton torres's discussion I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010
"If it's crashing consistently with a particular drawing, let me know, there may be a problem.  Please don't use all caps when composing forum messages."
Jul 30
norton torres posted a discussion

I GOT AN ERROR WHILE RENDERING IN AUTOCAD 2010

 I OPEN A 3D DRAWING IN AUTOCAD 2010 IT CRASH WHILE RENDERING WITH ACCURENDER.See More
Jul 28
Rich Hart posted a discussion

Grass Options for nXtRender

A user asked about the different ways to add grass to a model. Below are sample renderings showing 3 different approaches, along with links to download the groundcover and material files used.1. Textured Material - Use a material with a grass texture image.This model was rendered by simply using the textured nXt material call Grass-Rye_Dark.ArMaterial.This material is included with the standard nXt Material Libraries that can be downloaded here:…See More
Jun 22

© 2021   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service