AccuRender nXt

advanced rendering for AutoCAD


I have a regular license for last nXtRender, but I had to format the PC and reinstall AutoCAD 2014. Now the problem is that every time that I type "nXt", the program always asks me to authorize the product, and the windows shows me that I have only 24 days left for trying. When formatting the PC, the name of the machine has changes... does it have to do with the problem? Thanks.

Views: 433

Reply to This

Replies to This Discussion

If your license was from before January 1, 2013, you wil need to download version 318 from the bottom of this page.

I do see a license for nXtRender which may have been purchased by you through your Forum email address. I will send another copy of that license to that email address.

If you have your license number, you will need to re-enter it for the new machine.

If it does not accept it, send an email to and we will get it straightened out.


Thanks Al, seems to work now. Maybe it was due to the different machine name.

Errata: it does work until I reset the machine and start a new acad session. Will e-mail to the address you gave me. 

Problem solved: I had to rename the machine back to the previous name when I first installed the licensed nXt.

I'm glad that solved your problem.

We are having a problem with the license numbers "sticking" between sessions of AutoCAD, and have a fix for it which we should be able to release next week.

Well... actually I could rename the machine just because it is the same machine (Cudgel method!). But in case of a new workstation I wouldn't like to change the name as I use it to identify through the network.

This should work as well, you use the Replace Computer button at the bottom of the licensing Wizard and tell us which computer is no longer being used.

I am having the same issue... I tried emailing my request to the email below but it bounced back

send us an email at





Latest Activity

Rich Hart replied to Paul Jackson's discussion Bricscad
"Unfortunately, we don't have a version that works with BricsCAD now, and that older trial version cannot be reinstated."
Jun 19
Alfons Akamp replied to Paul Jackson's discussion Bricscad
"Ich habe hier auch eine nxtrender Version für Bricscad 15. Die sieht anders aus, als die von Acad. Leider ist auch bei mir der Testzeitraum schon lange abgelaufen. Gibt es die Möglichkeit mir eine Testlizenz dafür zuzuschicken??…"
Jun 19
George Ioannidis commented on Chris Fox's photo


"Another good rendering. Those two photoshopped reading lights are not looking good though. They don't follow the perspective, the left one is higher than the right one. Also, they are supposed to be turned on (judging from the light on wall…"
Jun 15
George Ioannidis commented on Chris Fox's photo

Single Family Home

"Great image as always. I would just blur the tree shadow on the lawn to match soft shadows on the building. Nice blending of cut-out greenery. Excellent job."
Jun 15
George Ioannidis commented on Chris Fox's photo

Railroad kitchen

"Very nice rendering Chris! The only thing that distracts me is the fruit bowl. It's too evidently pasted in PS.  Another thing (nothing to do with rendering) is the microwave above the stove. I would rather expect a cooker hood there."
Jun 15
akinlolu olugboji posted a discussion

trim and extension command

On AutoCad 2021.The trim and extension command works funny. I initiate the command then click the cutting edge (press entre) then click the lines I need to trim or extend.Now I initiate the command and as soon as I click the object selected trims or extend.  How can I correct this, it is really affecting my work?See More
Jun 14
Chris Fox posted photos
Jun 12
ebenezer attah koomson posted photos
Jun 3

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service