AccuRender nXt

advanced rendering for AutoCAD

pls am trying to do a presentation on two of our factories and am using  textures as the roof of the factory, i want to ask about the scale of the texture x = 7000 y =7000 hope is not to much or there is anything am doing wrong? bcos that scale make it more visible.

Views: 570

Attachments:

Reply to This

Replies to This Discussion

I have no idea what you're asking.  The texture map itself is terrible. It has a seam and one ridge that's larger than the others.  There's nothing wrong with using a scale of 7 meters x 7 meters,  but it's certainly unrealistically large for metal roofing.  The space between ridges works out to more than 1 meter in your example.
Try these.
Attachments:
i tried all yur materials but did not assign and cannot find it in the texture edit? may be there is something wrong with the files.
Banjoko's right-- your textures are not embedded.
So What am I doing wrong?
I'm not sure-- try writing out the material called Long Span Green and see what you get.  The file size should reflect the embedded textures.
These are the textures.
Attachments:
Basicamente tienes un problema de escalas. Lo unico qeu modifique es la dimension de tu mapa, para esto tome en consideracion qeu cada canal de la lamina tendria unos 30 cm, por lo cual 5 canales qeu es mas o menos lo qeu esta representado tendrian 1.5 mts (1500 ml). Ya con esto tu mapa qeuda mas o menos correcto. te recomiendo tener lo mas exacto posible la dimension de tus canales para poder obtener un mejor resultado
Try this
Attachments:
I have downloaded this, it shows fine in thumbnail mode but renders blank. Am I doing something wrong?
Bitmaps are not embedded.  Marc will have to upload a new version and embed the texture.

RSS

Search

Translate

Latest Activity

Daniel Hargreaves posted a discussion

Accustudio

I know this is hard to believe, but Accustudio is over 20 years old. It has been quiet for a couple of years now at the site. I'm looking to hand it off to the next generation. Is there anyone interested in working on the site and eventually taking over the ownership of it?See More
Dec 3
Roy Hirshkowitz replied to Peter Milner's discussion AR Studio texture editing
"Currently only one texture per component and one bump map.  There is a blended material which allows more complex permutations-- most people do texture blending in photoshop. Solid textures refer to the granite/marble/wood procedural…"
Dec 2
Roy Hirshkowitz replied to Peter Milner's discussion AR Studio testing
"Yes, it will be different.  Typing arstudio should be roughly the same operation as "running a quick test render"-- it may be a little slower, and the first time you type it, it will certainly be slower (it was before). …"
Dec 2
Peter Milner replied to Peter Milner's discussion AR Studio texture editing
"A further question: What is a solid texture?"
Nov 28
Peter Milner replied to Peter Milner's discussion AR Studio texture editing
"Okay. Another question on textures: In nXt you can layer different textures and bump maps to create a more complex material. For example, the Oak veneer material (image attached) uses two bump maps: one for the grain and one for the flecks. In…"
Nov 28
Peter Milner replied to Peter Milner's discussion AR Studio testing
"It's more that, when putting a render together, I work on the model, run a quick test render, go back to the model to adjust/add things, run a quick test render etc etc. Having to close studio down and then re-open it every time I want to…"
Nov 28
Roy Hirshkowitz replied to Peter Milner's discussion AR Studio texture editing
"For AutoCAD I don't think you need to manipulate this-- leaving it alone should work.  It's there for other applications (Rhino, Sketchup, etc.) which permit multiple sets of texture coordinates on the same mesh-- native AutoCAD…"
Nov 27
Roy Hirshkowitz replied to Peter Milner's discussion AR Studio testing
"There's an autocad command for tagging objects as lights-- it's called something like arstudiolight-- I'll check. ***** You can start an out-of-process final rendering and close ArStudio down and continue to work without shutting the…"
Nov 27

© 2019   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service