AccuRender nXt

advanced rendering for AutoCAD

I just finished a 3D model; it is a shopping center with parking.

cars and all objects are rpc. if you freeze the layer where there are the rpc render me it does.

if I thaw the layer memory problems. any of you had this problem? how to solve it?

the configuration is the following:
windows 7 pro 64 bit
autocad 2010
nxt 318B 64
memory pc 8g

3d model with rpc layer thawed 


Views: 219

Reply to This

Replies to This Discussion

don't use so many.....shed half of the cars....and you wont have memory problem


I try tonight

This is most likely not a memory problem-- it is a crash-- perhaps in the RPC code.  As long as you have swap file space available-- usually any free disk space-- you shouldn't run out of memory when using the 64 bit version.  It is possible one of the RPC objects has become corrupted.

I have a 1tb hdd, so I can increase the swap file size. How do I know which object is damaged rpc ????

are many: plants, people, cars .....

or I have to go to attempts?

i dont hink so roy....the more objects the more memory....

According to Micro$oft the memory limit of Windows 7 pro 64 bit is 192GB on physical memory. I doubt anyone could ever produce model that big. I remember one of my "heaviest" model I ever did with particle grass translated into mesh holding some tens of billion faces. nXt was able to render that, even on may machine with just 8GB of RAM.

 hi george i did a render 3 years a ago for harvester restaurant where i needed to show rpc people eating ,walking in ,standing etc....i could only put about 13 of them.....then i tried 15...i got the message roberto got....i took it down to 13 it worked.....i had at the time 8g of ram machine. i think its memory related issue....either autocad or NXT

Yeah-- something has clearly gone wrong.  It's just not running out of memory, though-- not in the old sense (which it could easily do on 32 bit systems.)

The user mode virtual address space limit on 64 bit windows (the statistic we probably care most about here) is actually 8TB or 8192GB.  All of that must be backed by swap file space which would likely be the limiting factor here.  That number goes up to 128TB on Windows 8.1 and Windows Server, BTW.

good morning
I did a bit of evidence:
1- I increased the page file windows to 25000 mb and kept giving me error
2-I split between layers in the parking lot (front, center back), and also render individually gave me error
3-I started to delete objects rpc for categories (percone, trees car).

  It seems that some people gave me error, in fact now I can do render around the car park full.

Thank you to everyone for the tips (due to the increase of memory for error rpc object), and if I have other problems I write. this is a big project after years of little work and I have to do the maximum

Listen to Roy, he's often right.




Latest Activity

Peter Milner replied to Peter Milner's discussion RenderFarm passes and tasks
"Hi Rich, That could be the answer. We have a new designer working at one of our other sites and she may have started a drawing from scratch instead of using a template. Therefore it would be set to use the standard rendering engine. Thank you for…"
7 hours ago
Rich Hart replied to Peter Milner's discussion RenderFarm passes and tasks
"Is the rendering engine set t be the Path Tracer on that machine? I see it is disabled on my computer if the engine is set to Standard."
8 hours ago
Peter Milner posted a discussion

RenderFarm passes and tasks

Got a strange glitch here.On one of our PCs, when sending a render to the Farm, the option to change the number of tasks is greyed out and stuck on 10. However, when a job is sent to the farm, it is automatically broken into 25 tasks.The PC is running the latest versions of nXt and the Farm and has been working perfectly up to  now.Any ideas?See More
13 hours ago
Peter Milner commented on Peter Milner's photo

screend brochure 2019 05

"You may be right on the bricks. What looks like noise is actually the texture of the fabric."
13 hours ago
George Ioannidis commented on Peter Milner's photo

screend brochure 2019 05

"Those are all exceptional work, Peter! Congratulations!On this one only: bricks look big to me, but maybe I am wrong. Also some areas in shadow look still a bit noisy."
Oct 16
Peter Milner posted photos
Oct 15
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"1-  On the Rendering Tab there is a popdown called Destination.  The option is called something like "Local Out of Process".  2-  No, installation will require admin access."
Oct 5
Mark Brinkman replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"I am an old Accurender user. I now need to try and re-create some old images from old models. (about 20 years old) I have now downloaded Accurender Studio, and now work with AutoCAD 2016 and 2017 I have 2 questions related to Accurender Studio: 1)…"
Oct 4

© 2019   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service