AccuRender nXt

advanced rendering for AutoCAD

Adds support for *.skp files to the Texture Mesh Object.  Performance is a little slow for large files.  Let me know if it works.

See what's new for more info.

Views: 1142

Reply to This

Replies to This Discussion

Thanks Roy. Yes, in fact I think I'm spending too much time in low quality models...

Hi,

I have bee using NXT 1.0.271 since it came out and am a little confused on how to upgrade.

in AR3 and then AR4 I used to down load a upgrade file but don't see that now.

Thank you

Peter Norwood

http://uhaweb.hartford.edu/norwood/

The latest nXt on the download page will work fine with your current license.  Select "Download for use with Purchased License".  Just run the installer after downloading.

Thank you very much.

Could you please tell me if I have a commercial license or an educational license.

I think I had an educational license with AR3 and AR4 but may have a full NXT.

Thanks again

Peter Norwood

You've got a standard nXt license.  Educational licenses have not (to date) been offered for this product.

Thanks much

Hello Roy

 

Is this an unrelated problem when trying to opening a .skp model?

 

"Application failed to start because MSVC100.DLL was not found.  Re-installing my fix the problem."

 

 

Yep, different problem.  Try downloading and installing from here and let me know.  These may refuse to install.

Good morning Roy,

 

I installed the MS visual c++ 2010 and ran the repair for  Net Framework 4 as recommanded from the web for XP-64.

 

No change.  Nxt will ask for an insert location and then display the error.

Any other suggestions other than reinstalling the previous build?

 

The link I gave you was for x86 (32 bit)-- did you install that one or the one for x64?  If so you need to try to install the one for x86.

I did install the one for the X64 bit system.  Will try the 32 bit .

 

Success.  It's all in the numbers.

The model inserted without a hitch, materials and all.  As noted earlier, the material scales will need to be edited at times.  All materials attached to the test model I inserted came in with a scale of 1x1 with the model scaled correctly.

Super programming, Roy.  Great up-grade.

Thanks for the help.

 

RSS

Search

Translate

Latest Activity

Rich Hart replied to Paul Jackson's discussion Bricscad
"Unfortunately, we don't have a version that works with BricsCAD now, and that older trial version cannot be reinstated."
Jun 19
Alfons Akamp replied to Paul Jackson's discussion Bricscad
"Ich habe hier auch eine nxtrender Version für Bricscad 15. Die sieht anders aus, als die von Acad. Leider ist auch bei mir der Testzeitraum schon lange abgelaufen. Gibt es die Möglichkeit mir eine Testlizenz dafür zuzuschicken??…"
Jun 19
George Ioannidis commented on Chris Fox's photo
Thumbnail

Bedroom

"Another good rendering. Those two photoshopped reading lights are not looking good though. They don't follow the perspective, the left one is higher than the right one. Also, they are supposed to be turned on (judging from the light on wall…"
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Single Family Home

"Great image as always. I would just blur the tree shadow on the lawn to match soft shadows on the building. Nice blending of cut-out greenery. Excellent job."
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Railroad kitchen

"Very nice rendering Chris! The only thing that distracts me is the fruit bowl. It's too evidently pasted in PS.  Another thing (nothing to do with rendering) is the microwave above the stove. I would rather expect a cooker hood there."
Jun 15
akinlolu olugboji posted a discussion

trim and extension command

On AutoCad 2021.The trim and extension command works funny. I initiate the command then click the cutting edge (press entre) then click the lines I need to trim or extend.Now I initiate the command and as soon as I click the object selected trims or extend.  How can I correct this, it is really affecting my work?See More
Jun 14
Chris Fox posted photos
Jun 12
ebenezer attah koomson posted photos
Jun 3

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service