AccuRender nXt

advanced rendering for AutoCAD

I've been absent because of work, but in the meantime still trying to tame the nxt.
This is the latest result that I have achieved. In the indoor image, I rendered in two separate steps interior daylight and interior lighting, then combined them in image editor.
I still think the result is not the best, and my computer does not help, therefore, if someone can help me with software configuration and video, I can buy platesthe separate parts, because a friend has undertaken to assemble the machine for me. 
Thank you all.P.S.: I hate those dots on tha chair and tha back blue wall in outdoor scene!!

Views: 558

Reply to This

Replies to This Discussion

Hi,

Your Interior is nice but its really way too bright, it needs some sharp contrast from the objects inside. I think maybe your screen is set on similar settings? If you want, you can forward the file and I can try to experiment with it and send it back with the settings.

The Exterior is really good, I cant see the black dots you're talking about but the texturing on the Flooring and the Chair/Table Patio set is good. The texturing on the dark brown benches needs a look into, its too flat.

regards

Sure I can forward the file. Any help is welcome.

About the dots, it's not black dot i was taking about. I was referring to the bright spots in the shadow areas. See the new image below (it's the same as before, but marked in red).

I Can't send the file here, cause the size of zipped file exceeds the limit.

I can send by email.

Why not just render the interior with daylight and lights?

Put the interior lights on a separate channel and save the render as an nXt Image. Then you can play with the balance later in the nXt image editor.

2 seconds work in Photoshop will fix the dots.

For your computer, buy the most cores you can afford.

Thanks, Peter.

About the 2 renders, I don't know what i do wrong, but when I put the lights on, even on a separate channel, using de preset "interior daylight", it doesn't work as I desire, at least not in a time I can consider good. Roy advices me to render twice or more, and then combine the resulting images.

By the way, your work is inspiring. I downloaded Sven Christiansen CAD bloskc. There is a possibility that you make available library materials you use in NXT?

Thanks Again

Have a look at this office setup. It uses interior daylight with lights.

Attachments:

Peter, I know its been discussed before but how can we get rid or or reduce the specular noise when using the Path Tracer for Indoor Daylight scenes, this really puts me in a fix when trying to render large res images. I end up mixing interior and exterior Lit images playing with channels.

Cheers

Specular noise is at its worst with spotlights and highly reflective materials such as chrome. I get it a lot with office chairs on polished aluminium 5 star bases.

Using area lights usually minimizes the problem and then I do a final bit of touch up in Photoshop.

Thanks Peter, will try.

Thank again, Peter. I started the render and I will wait for the results. Please send me a picture with your render done without finishing in photoshop and how long it took.

This ran for 300 passes in 1 hour 13 minutes.

It could probably do with another 200 passes.

My redering is still running, and after 3 hours i have 166 passes. I definitely need more cores.

RSS

Search

Translate

Latest Activity

James Bloomer posted photos
May 1
Roy Hirshkowitz commented on Maciej's photo
Thumbnail

c3

"No license yet. Send some results when you can-- might be easier as a forum post instead of this comment section."
Apr 7
Roy Hirshkowitz commented on Maciej's photo
Thumbnail

c3

"The drawings are likely scaling correctly-- don't scale the geometry please. These are only display units for the arstudio interface."
Apr 7
Maciej commented on Maciej's photo
Thumbnail

c3

"You were right, Roy. It was about the file name - ash on my head. ARStudio seems to be very ok for my humble interiors' purposes. One minor point (see attached) - meters or millimeters only, what about centimeters? I need to scale all my…"
Apr 7
George Ioannidis commented on Maciej's photo
Thumbnail

g2

"Yeah, I know, usual situation. :)"
Apr 7
Roy Hirshkowitz commented on Maciej's photo
Thumbnail

c3

"Looks like there's no file name.  Try saving the drawing to a file first, then run ArStudio.  This is a bug, obviously.  Thanks."
Apr 7
Maciej commented on Maciej's photo
Thumbnail

c3

"I followed all the instructions and that is what I see now...Life is a struggle... Is there something I did wrong? AutoCAD 2013, nXt 0358-SG17, Windows 7"
Apr 7
Roy Hirshkowitz's discussion was featured

AccuRender Studio

Here's the latest version of the new stuff.  If you're interested, try it at your leisure and let me know what you find.  It's a work in progress, so please be kind.  We'll likely have some bugs and certainly have some missing features.******Some highlights:Standalone renderer which accepts input from Rhino, Sketchup, Obj and FBX.Plugins for AutoCAD and other CAD applications.Online material and plant…See More
Apr 7

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service