AccuRender nXt

advanced rendering for AutoCAD


Is there any chance, along with numeric lightness and contrast controls, to have also controls similar to classic camera, such as diaphragm fStop, shutter speed and film sensitivity, with rendering results close to photographer's experience?


Views: 43

Reply to This

Replies to This Discussion

Hmm, clear and laconic answer :)
And why is that, if I may ask?
It's a lot of work for not much payback.

Many of the traditional film-based stuff such as ISO #'s and dark room techniques are going away as digital photography progresses (we're not too far away from very large latitude photo-receptors that should be able to capture HDR directly without bracketing.)

Any of these things can certainly be modeled-- but fewer and fewer of our users will really understand how these work anyway. For example, the relationship of Depth of Field to the dimension of the film, the lens length, the fstop is very complex and difficult to predict even for a knowledgable photographer. Most of our users will have no idea how to use these.
Thanks, Roy.
So, but I find that working with camera LENS is more confortable, and usefull than with FOV. In real life we talk about the lens, and never about FOV. Is it a big work to change or to add this setting?
Maybe we are the last "analog camera dinosaurs" still alive, Marc :-)
Nope-- it's trivial. It's also not going to happen.




Latest Activity

Rich Hart replied to Paul Jackson's discussion Bricscad
"Unfortunately, we don't have a version that works with BricsCAD now, and that older trial version cannot be reinstated."
Jun 19
Alfons Akamp replied to Paul Jackson's discussion Bricscad
"Ich habe hier auch eine nxtrender Version für Bricscad 15. Die sieht anders aus, als die von Acad. Leider ist auch bei mir der Testzeitraum schon lange abgelaufen. Gibt es die Möglichkeit mir eine Testlizenz dafür zuzuschicken??…"
Jun 19
George Ioannidis commented on Chris Fox's photo


"Another good rendering. Those two photoshopped reading lights are not looking good though. They don't follow the perspective, the left one is higher than the right one. Also, they are supposed to be turned on (judging from the light on wall…"
Jun 15
George Ioannidis commented on Chris Fox's photo

Single Family Home

"Great image as always. I would just blur the tree shadow on the lawn to match soft shadows on the building. Nice blending of cut-out greenery. Excellent job."
Jun 15
George Ioannidis commented on Chris Fox's photo

Railroad kitchen

"Very nice rendering Chris! The only thing that distracts me is the fruit bowl. It's too evidently pasted in PS.  Another thing (nothing to do with rendering) is the microwave above the stove. I would rather expect a cooker hood there."
Jun 15
akinlolu olugboji posted a discussion

trim and extension command

On AutoCad 2021.The trim and extension command works funny. I initiate the command then click the cutting edge (press entre) then click the lines I need to trim or extend.Now I initiate the command and as soon as I click the object selected trims or extend.  How can I correct this, it is really affecting my work?See More
Jun 14
Chris Fox posted photos
Jun 12
ebenezer attah koomson posted photos
Jun 3

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service