AccuRender nXt

advanced rendering for AutoCAD

I needed to format my PC ,  now I reinstalled all sofwares, including AUTOCAD 2013 64 bits, and the NXT version,  ArnXt - 64_0329.

My problem is, I can`t load the file " AccuRender nXt64, and AccuRender nXt_18_64 into the Autocad load/unload Applications, whem I type the load comand, I received the message "Unable to load Accurender nXt64.Arx.file".

Has another way to do that.

Views: 279

Reply to This

Replies to This Discussion

Try these instructions, using _appload to load the “_19” arx for AutoCAD 2013:

Normally nXtRender registers its commands with AutoCAD during installation. On occasion, this mechanism may fail. In this case you will need to manually load nXt the first time you run it in a particular version of AutoCAD. Use the following procedure:

1.      Type _appload at the command line.

2.      Navigate to the folder where nXt was installed. This is normally C:\Program Files\AccuRender nXt

3.      Select one of the following files depending on your platform:

 

·         AccuRender nXt.arx -OR- AccuRender nXt64.arx (AutoCAD 2007 – 2009)

·         AccuRender nXt_18_.arx -OR- AccuRender nXt_18_64.arx (AutoCAD 2010 – 2012)

·         AccuRender nXt_19_.arx -OR- AccuRender nXt_19_64.arx (AutoCAD 2013 – 2014)

·         AccuRender nXt_20_.arx -OR- AccuRender nXt_20_64.arx (AutoCAD 2015- 2016)

·         AccuRender nXt_21_.arx -OR- AccuRender nXt_21_64.arx (AutoCAD 2017)

·         AccuRender nXt_22_.arx -OR- AccuRender nXt_22_64.arx (AutoCAD 2018)

 

4.      Press Load

 

Check the AutoCAD command line to verify that the application loaded without error. At this point you should be able to type nxt or ar5 to launch the application. You should not have to repeat this procedure again for this version of AutoCAD. Simply typing nxt or ar5 at the command prompt should cause nxt to load. You may need to repeat this procedure if you install another version of AutoCAD.

 

It’s also possible that you downloaded the wrong install file, like the 32 bit version when you needed the 64 bit install file.. If you are on a 64 bit machine, make sure that you are running one of the ARX modules that contains _64” in the name.

Rich, thanks for your help.

RSS

Search

Translate

Latest Activity

James Bloomer posted photos
Monday
Peter Milner posted photos
Jul 30
James Bloomer posted photos
Jul 24
Peter Milner commented on Peter Milner's photo
Thumbnail

home office 05

"Yes. We used to hide a little soft toy bear called Fret in our sets back in the day when we used photography. We then created a 3D version of Fret and included him in many of our renders. If you have a look at the images in my Ambus 2014 album, you…"
Jul 24
Kevin Lockwood commented on Peter Milner's photo
Thumbnail

home office 05

"Do you ever hide stuff in your scenes? I used to have my dog Joey in EVERY render. Sometimes an icon on a monitor or in a window reflection, or book cover."
Jul 23
Rich Hart replied to Paul Jackson's discussion Bricscad
"No, we still haven't written an interface for Bricscad 20."
Jul 23
Peter Milner commented on Peter Milner's photo
Thumbnail

home office 01

"Thanks George. I've had to produce quite a lot of lifestyle images in a short space of time. It's challenging coming up with so many different settings and layouts."
Jul 22
George Ioannidis commented on Peter Milner's photo
Thumbnail

home office 01

"Those are all exceptional Peter. Top notch job, as always."
Jul 17

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service