AccuRender nXt

advanced rendering for AutoCAD

I needed to format my PC ,  now I reinstalled all sofwares, including AUTOCAD 2013 64 bits, and the NXT version,  ArnXt - 64_0329.

My problem is, I can`t load the file " AccuRender nXt64, and AccuRender nXt_18_64 into the Autocad load/unload Applications, whem I type the load comand, I received the message "Unable to load Accurender nXt64.Arx.file".

Has another way to do that.

Views: 347

Reply to This

Replies to This Discussion

Try these instructions, using _appload to load the “_19” arx for AutoCAD 2013:

Normally nXtRender registers its commands with AutoCAD during installation. On occasion, this mechanism may fail. In this case you will need to manually load nXt the first time you run it in a particular version of AutoCAD. Use the following procedure:

1.      Type _appload at the command line.

2.      Navigate to the folder where nXt was installed. This is normally C:\Program Files\AccuRender nXt

3.      Select one of the following files depending on your platform:

 

·         AccuRender nXt.arx -OR- AccuRender nXt64.arx (AutoCAD 2007 – 2009)

·         AccuRender nXt_18_.arx -OR- AccuRender nXt_18_64.arx (AutoCAD 2010 – 2012)

·         AccuRender nXt_19_.arx -OR- AccuRender nXt_19_64.arx (AutoCAD 2013 – 2014)

·         AccuRender nXt_20_.arx -OR- AccuRender nXt_20_64.arx (AutoCAD 2015- 2016)

·         AccuRender nXt_21_.arx -OR- AccuRender nXt_21_64.arx (AutoCAD 2017)

·         AccuRender nXt_22_.arx -OR- AccuRender nXt_22_64.arx (AutoCAD 2018)

 

4.      Press Load

 

Check the AutoCAD command line to verify that the application loaded without error. At this point you should be able to type nxt or ar5 to launch the application. You should not have to repeat this procedure again for this version of AutoCAD. Simply typing nxt or ar5 at the command prompt should cause nxt to load. You may need to repeat this procedure if you install another version of AutoCAD.

 

It’s also possible that you downloaded the wrong install file, like the 32 bit version when you needed the 64 bit install file.. If you are on a 64 bit machine, make sure that you are running one of the ARX modules that contains _64” in the name.

Rich, thanks for your help.

RSS

Search

Translate

Latest Activity

George Ioannidis commented on OYEBANJI EMMANUEL's photo
Thumbnail

test 7 pass 515 (1) (1)

"Good start. Glass windows need some reflections , they look too plastic and dull. What are those white lines under the building? Parking lot for skateboards? ;) Shrub fence on the right needs revision."
Jun 30
OYEBANJI EMMANUEL posted a photo

test 7 pass 515 (1) (1)

My first exterior render with accurender
Jun 20
George Ioannidis commented on OYEBANJI EMMANUEL's photo
Thumbnail

coastal chic final

"Looks really good. The glass table material is more than convincing."
May 24
OYEBANJI EMMANUEL posted a photo

coastal chic final

My first major render with accurender studio and autocad.
Apr 29
Roy Hirshkowitz replied to OYEBANJI EMMANUEL's discussion Questions on problems encountered with accurender studio
"Really nice work-- is the modeling done in AutoCAD?  If so, consider creating a gallery of your work and submitting this photo.  Photos have to be approved, but generally speaking work of this quality will be. For some of your original…"
Apr 25
OYEBANJI EMMANUEL replied to OYEBANJI EMMANUEL's discussion Questions on problems encountered with accurender studio
Apr 25
OYEBANJI EMMANUEL replied to OYEBANJI EMMANUEL's discussion Questions on problems encountered with accurender studio
"Good day Sir, I just updated accurender studio to the latest version and found out that most of my questions have been answered. I can see the increase in speed, the update speed, material library ui and the speed of the rendering. Please Roy, keep…"
Apr 25
OYEBANJI EMMANUEL posted a discussion

Questions on problems encountered with accurender studio

1.Have you released a version that can accept jpeg ?2.Is the speed of the last version you created, higher thanthat of the first version ?3.Why cant we easily update to the latest version ?4.Why cant we use the background function to place things behind the windows for interior rendering ?5.I must really commend you because this software has a futureand if improved upon, can become the best rendering software inthe industry. I currently use vray for my production and willlike accurender studio…See More
Apr 22

© 2022   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service