AccuRender nXt

advanced rendering for AutoCAD

I needed to format my PC ,  now I reinstalled all sofwares, including AUTOCAD 2013 64 bits, and the NXT version,  ArnXt - 64_0329.

My problem is, I can`t load the file " AccuRender nXt64, and AccuRender nXt_18_64 into the Autocad load/unload Applications, whem I type the load comand, I received the message "Unable to load Accurender nXt64.Arx.file".

Has another way to do that.

Views: 338

Reply to This

Replies to This Discussion

Try these instructions, using _appload to load the “_19” arx for AutoCAD 2013:

Normally nXtRender registers its commands with AutoCAD during installation. On occasion, this mechanism may fail. In this case you will need to manually load nXt the first time you run it in a particular version of AutoCAD. Use the following procedure:

1.      Type _appload at the command line.

2.      Navigate to the folder where nXt was installed. This is normally C:\Program Files\AccuRender nXt

3.      Select one of the following files depending on your platform:

 

·         AccuRender nXt.arx -OR- AccuRender nXt64.arx (AutoCAD 2007 – 2009)

·         AccuRender nXt_18_.arx -OR- AccuRender nXt_18_64.arx (AutoCAD 2010 – 2012)

·         AccuRender nXt_19_.arx -OR- AccuRender nXt_19_64.arx (AutoCAD 2013 – 2014)

·         AccuRender nXt_20_.arx -OR- AccuRender nXt_20_64.arx (AutoCAD 2015- 2016)

·         AccuRender nXt_21_.arx -OR- AccuRender nXt_21_64.arx (AutoCAD 2017)

·         AccuRender nXt_22_.arx -OR- AccuRender nXt_22_64.arx (AutoCAD 2018)

 

4.      Press Load

 

Check the AutoCAD command line to verify that the application loaded without error. At this point you should be able to type nxt or ar5 to launch the application. You should not have to repeat this procedure again for this version of AutoCAD. Simply typing nxt or ar5 at the command prompt should cause nxt to load. You may need to repeat this procedure if you install another version of AutoCAD.

 

It’s also possible that you downloaded the wrong install file, like the 32 bit version when you needed the 64 bit install file.. If you are on a 64 bit machine, make sure that you are running one of the ARX modules that contains _64” in the name.

Rich, thanks for your help.

RSS

Search

Translate

Latest Activity

Roy Hirshkowitz replied to Peter Milner's discussion Windows 11
"I'm not aware of anything... I don't have it here so I can't promise anything."
yesterday
Dizzy Gosnell posted photos
yesterday
Peter Milner posted a discussion

Windows 11

Does anyone know if there are any issues with updating to Windows 11 for either nXt or AR Studio on AutoCAD 2022?See More
Wednesday
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"0296 is up-- includes New... options for light channels."
Monday
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"0295 is up, includes scale factor for preview image and stop after # passes.  Haven't gotten to New light channel option in Lights interface yet.  Check it out if you have a chance (no worries if not.)"
Jan 20
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"Yeah-- I understand.  I just think you may find you have a similar problem in this new engine with trying to estimate how many passes will be good enough.   That can vary a lot. You're always going have some error, allocating…"
Jan 7
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"The problem is when I'm running several renders over a weekend. How will I know how much time to allocate to each one? I wouldn't want them to run for the same amount of time, as one may over-cook to no extra benefit, while another is…"
Jan 7
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"It's an easy feature to add, but I'm pretty sure with this new version you'll find a time constraint to be more reliable.  The rendering below is probably done already, with a noise filter, or close to it."
Jan 7

© 2022   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service