AccuRender nXt

advanced rendering for AutoCAD

I am trying to use a specific wood finish from a furniture manufacturer and the studio lighting seems to add a lot of red tint. Do I adjust the lighting or the finish sample?

Views: 1209

Reply to This

Replies to This Discussion

Attach a picture here so we can see what you mean.

I'm assuming you're using the default studio lighting--  perhaps changing the background color or just alpha compositing afterwards.  If either of these assumptions isn't true-- let me know.  It's important, because by default the skylight is neutral-- if you've changed something, however, that may not be true.


I'm pretty sure your best bet will be to alter the material textures-- in this case bring them into Photoshop or eq. and turn down the saturation a bit.  Alternatively you could try the Saturation slider in nXt or the Image Editor to see if that will give you what you need.


Nice renderings, BTW.




Yes, I have been using the default studio lighting. I will try the saturation slider as I have already tried the Image Editor.
I've discovered that the finish sample changes considerably when using "Auto Balance" within Microsoft Photo Editor. (Turns orange) Where can I get a better selection of wood samples? I've tried scanning and taking a photo of the real deal.

This is an area where other users may be able to help.  We've got a few users doing high quality furniture who may be willing to share.  Creating your own textures is not an easy process.  Even once you've gotten the scan and the color balance right, you still have the problem of producing tileable textures without too much obvious repetition.  This is usually done partly with software and partly with black magic.


High quality textures are available for sale from outfits like Arroway.  Our content and entourage page has some starting points-- see the materials stuff and the texture stuff.  Manufacturers often have decent samples as departure points-- it sounds like you may already have some-- I can't quite tell from your post. 


Avoid MS's Auto-Balance if you don't like it, BTW.

It's your background causing the problem as I suspect you've got it set to Solid colour.

Change it to Sky where it will use the HDRI and then save the image with an Alpha channel.

I did, finally, get around to trying this.  I left the background as white but turned down the brightness to compensate (-0.35) in this case.  This is necessary because the furniture is being rendered in complete isolation and the tone operator is over-exposing it.  

I did use the Path Tracer for the image below, but you'll get similar results using the original engine.  The Path Tracer does a better job with the lighting inside of the shelving, for example.  It takes quite a bit longer to resolve, though.

Is this more what you had in mind?

Here's what I get with background set to Sky

..and now with your furniture

That is a beautiful thing! Your input has been invaluable. Thank you.




Latest Activity

Rich Hart replied to Peter Milner's discussion AutoCAD 2021
"Try installing the latest version on this downloads page: It works for me with AutoCAD 2021."
Peter Milner posted a discussion

AutoCAD 2021

Is there a new version of Accurender to work with AutoCAD 2021.I've tried loading my existing version in, but it doesn't work.See More
Rich Hart replied to Maciej's discussion channels & Standard rendering
"Are there any lights in displayed in the Lights list in your model? If so than the Channels button should show the list of lighting channels:"
Mar 21
Maciej posted a discussion

channels & Standard rendering

Will it work? As I click "channels" nothing happens. Is it ok?See More
Mar 21
Maciej commented on Peter Milner's photo

fulcrum ce lifestyle 01

"Peter, thank you for your answwer. As far as 0,6 cloudness is concerned, I used to work in Alton/Hampshir for couple of years... It is real, I guess, but, honestly, I liked it...   :) You mean real world settings - with sun and auto sky or…"
Mar 20
Peter Milner commented on Peter Milner's photo

fulcrum ce lifestyle 01

"I usually use real world settings. Cloudiness is set to 0.6 which is quite optimistic for England. Interior lights are put on a separate lighting channel so that I can play with the balance of lighting between interior and exterior sources at the…"
Mar 19
Rich Hart replied to Maciej's discussion most unusual icons
"Great! Thanks for the update. Hopefully I can remember  or find this answer again, the next time this question surfaces."
Mar 18
Maciej replied to Maciej's discussion most unusual icons
"Rich, Thank you, icons are back! It works. I tried rebooting yesterday as well, to no avail, but crucial issue was /u parameter I guess."
Mar 18

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service