AccuRender nXt

advanced rendering for AutoCAD

Well, this is the frist image i upload using nxt, but not the very first one i did.

I would like to go deeper in the renderer, but i'm to insecure about the work.

I used path trace ando change some settings. Hdri on the sky, cloudness and sun at 0.5.

And after 8 hrs and only 52 passes, this is the result.

Views: 1021

Attachments:

Reply to This

Replies to This Discussion

Ola Walace, veja este site, ele vai dar mais informação do que eu seria capaz, é bem interessante.

    http://www.alexhogrefe.com/

Quite a link.

muito bom! Já sei como passar o tempo agora!

valeu, Décio

nXtStudio only opens obj, rhinoceros and sketchup files. All my drawing is autocad files. Should I convert the file?

Open your drawing in AutoCAD and load nXt.  Type (nxtwrite) at the command line-- included the parentheses.  You'll be prompted to save an .nXtScene file which is nXtStudio's native format.  This can be loaded directly.

Thanks, again, Roy.

Well, i've tried the Roy's hint about caustic/hybrid on another work, and i realized that the caustic effect appears  only in the deepest part of the pool. It's the same material all over the pool's surface.

Which engine?

An impressive design I must say!

It's hybrid, Roy.

 

Thank you, Akinlolu.

Not sure what's up then.  The caustics using this engine have been very robust.  You can send the model, or a simplified version, if you like and I can take a look.  There's an upload link under Support for larger models or models you don't want to share publically.

I analyzed the model further, and you know what? Neither material nor objects are marked with caustics. Is the Hybrid just acting from the transparency? I'll send the file soon.

RSS

Search

Translate

Latest Activity

Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"Here's the png again."
Friday
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"The png I sent you does have an alpha channel."
Friday
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"There really isn't much to it.  All I did was go to the Material Editor and replace the bitmaps in the decal with the png version-- I can't remember whether I had to change both the Color and Opacity (I think so.)  If you're…"
Friday
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"Okay. I've changed it to a png file. What steps do I take within AR Studio to get it to work properly"
Friday
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"Use png for this-- it's much more reliable.  All I did was go into the Material Editor and replace your tif with my png."
Friday
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"Well, I've tried what you suggested, but I still can't get it to work. I'll send you the model and the decal. Maybe I've got something wrong."
Friday
Peter Milner replied to Roy Hirshkowitz's discussion AccuRender Studio
"I tried closing down AutoCAD, restarting it, opening the drawing, loading nXt and AR Studio and it still didn't show up. However, it did suddenly appear when I started the interactive render."
Friday
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio
"If the preview was running you'll need to reload.  Any changes you make to the objects won't be captured automatically. (I need to change the "Go" button color or something when ardecal command is used. If this doesn't…"
Thursday

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service