AccuRender nXt

advanced rendering for AutoCAD

Is there any way to  change the normal of the groundcover's grown plane?

I just tried applying it to a vertical surface but, though it works, the leaves they are always growing in the Z-Vector direction.


Views: 947


Reply to This

Replies to This Discussion

I just tried to copy an existing groundcover and in the leaves tab I set the angle value to 90. It seems to work!


thanks Miguel, but it's not exactly the same effect, since leaves position is still calculated over the Z-Axis

Try applying it to a 3d solid.  Let me know.

It works!

Is it possible to get the same result for mesh objects? : )

Yes, works better!

When I try on doing the kind of plants that "hang" for elevated planters, balconies with a touch... I generate a 3d solid which is an extrusion of the desired front view of the element as I decided it to "populate". Then, I explode the 3D object and delete all faces that should not show. 

I apply an "invisible material" to it and then proceed to attach the groundcover. It works wonders for some distances depending on the detail level. Also, if you wish to play around a bit, this method is very useful when you need shaped foliage, like the kind we desire to have aside any fence, edging a curb or even as filling over medium sized grass areas. It's a little tricky to set accurate scaling (for me, I reckon).

We tend to use pre-done plants which are sort of dioramas. They are good but usually the result must be "equalized" with the rendered image so they don't look "cartoonish" or faded. We copy a number of these entities to fill some areas. The groundcover is a very good tool.. trust me!. Take time to play with it and you'll never regret. One hint.. get yourself some crisp images to use as flowers and leaves. The better the source, the better final results.

Very interesting method. Could you please upload a couple of example images?

Ok, here are a few pics with more or less the process I explained. 

  This little model is what I use to setup my groundcover materials and I recommend everyone to create one in order to facilitate the custom materials creation process for two reasons: 1. the materials and groundcover SCALE may not be the same for every job (for me it changes all the time) 2. There's a lot of trial-error rendering until you get what's wanted. So, before proceeding to rendering anything in nxt, I make sure that the scale is as the models I'm used to deal with. If not, I use this test platform. 

  exc1. Here you see the desired shape drafted upon the planter's edge (keep in mind the UCS). If you look real close, you may see that the shape is not co-planar with the planter's wall. it's "shifted" a bit to avoid artifacts and produces a gap which also prevents undesired shadows or clipping.

  exc2. This is the extrusion. Notice that I make it HUGE!. The reason for this, is to facilitate undesired faces deletion. If you make it small, you waste a lot of time deleting small pieces.

  exc3. After EXPLODING the resulting 3D Solid, every single face turns into a REGION which works as surface for applying groundcover. Regions are cool, because they can be edited via boolean operations. I also create a top "cover" face using any method (i.e. 3Dface or region too).



exc4. This is the rendered model. After applying an "invisible" material to the region, assigning the desired groundcover and scaling adequately, you can see the result is very good and works wonders at certain distances (depending on the groundcover quality). I have left the "half donut" object I use for other purposes to illustrate the potential of the groundcover tool which in this case, is sort of a mulch for rocks. I always have water, walls, the half donut and the hanging plants in the model when creating new materials. I play with the scale a lot! specially because the water and the groundcovers depend on independently scaled images pretty much all the time. So, I find the desired scale WITHIN the testing model and then scale the project's model, matching both test and project to the wall thickness. 

  But this is just how I do it. I'm sure they are many other methods which work and could be simpler.


Ever tried this!

There are various problems related to it:

  • Trees easily grow very huge in size
  • It is difficult to set them up to stick to walls as in real life
  • Your model has to be accurate, normals facing the right direction etc, otherwise it would grow into the building
  • It creates materials with embedded textures

For that, try IvyGeneretor. George Ioannidis knows pretty well how to use it.




Latest Activity

Rich Hart replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"I see that if I turn the soffit layer off, that those can lights on the right are working. So I assume the soffit is blocking the light. Unfortunately, I'm not able to try moving the can lights down for some reason. I can try looking into this…"
12 hours ago
Brittany Watson replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"I apologize, they are the smaller can lights on right soffit side of the arched ceiling, the bigger ones on the opposite side (left) are working correctly. They do work when the light source is pulled out of the can object or out of the soffit, so…"
15 hours ago
Rich Hart replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Unfortunately, the model was still just too large for my machine. After about 15 minutes I had to turn off the computer so that I could do something else while it was rendering.. Could you give me any idea of where the lights are that don't…"
15 hours ago
Brittany Watson replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Just sent. Thank you for the quick response!"
19 hours ago
Rich Hart replied to Brittany Watson's discussion Continuous Recessed Lighting Issues
"Can you send us a model where this is happening, to see if we can duplicate it here? As small a model as possible would be appreciated. You can use this link to send it to us: Thanks, Rich"
Brittany Watson posted a discussion

Continuous Recessed Lighting Issues

Hi I use AutoCAD Architecture and have been having on going problems with a recessed can light block. I have completed 3 renderings now in which I have had to spend days trying to get my recessed lighting to work. Other lights work, and occasionally some of the can recessed lights will show up. I have exploded the block and added them individually, I have aimed the light and rotated it every which way, but most of the time nothing works.  I have tested out the problem on my current rendering…See More
Roy Hirshkowitz replied to Peter Milner's discussion Accurender Studio cloud rendering
"I pulled the option to use my Azure Batch cloud out of the current product.  There wasn't much interest in it.  You can set up your own Azure account with Microsoft and use it, it's not trivial but also not too hard.  I…"
Feb 21
Peter Milner posted a discussion

Accurender Studio cloud rendering

How much does it cost to use cloud rendering?See More
Feb 21

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service