AccuRender nXt

advanced rendering for AutoCAD

Is there any way to  change the normal of the groundcover's grown plane?

I just tried applying it to a vertical surface but, though it works, the leaves they are always growing in the Z-Vector direction.

 

Views: 921

Attachments:

Reply to This

Replies to This Discussion

I just tried to copy an existing groundcover and in the leaves tab I set the angle value to 90. It seems to work!

Attachments:

thanks Miguel, but it's not exactly the same effect, since leaves position is still calculated over the Z-Axis

Try applying it to a 3d solid.  Let me know.

It works!

Is it possible to get the same result for mesh objects? : )

Yes, works better!

When I try on doing the kind of plants that "hang" for elevated planters, balconies with a touch... I generate a 3d solid which is an extrusion of the desired front view of the element as I decided it to "populate". Then, I explode the 3D object and delete all faces that should not show. 

I apply an "invisible material" to it and then proceed to attach the groundcover. It works wonders for some distances depending on the detail level. Also, if you wish to play around a bit, this method is very useful when you need shaped foliage, like the kind we desire to have aside any fence, edging a curb or even as filling over medium sized grass areas. It's a little tricky to set accurate scaling (for me, I reckon).

We tend to use pre-done plants which are sort of dioramas. They are good but usually the result must be "equalized" with the rendered image so they don't look "cartoonish" or faded. We copy a number of these entities to fill some areas. The groundcover is a very good tool.. trust me!. Take time to play with it and you'll never regret. One hint.. get yourself some crisp images to use as flowers and leaves. The better the source, the better final results.

Very interesting method. Could you please upload a couple of example images?

Ok, here are a few pics with more or less the process I explained. 

  This little model is what I use to setup my groundcover materials and I recommend everyone to create one in order to facilitate the custom materials creation process for two reasons: 1. the materials and groundcover SCALE may not be the same for every job (for me it changes all the time) 2. There's a lot of trial-error rendering until you get what's wanted. So, before proceeding to rendering anything in nxt, I make sure that the scale is as the models I'm used to deal with. If not, I use this test platform. 

  exc1. Here you see the desired shape drafted upon the planter's edge (keep in mind the UCS). If you look real close, you may see that the shape is not co-planar with the planter's wall. it's "shifted" a bit to avoid artifacts and produces a gap which also prevents undesired shadows or clipping.

  exc2. This is the extrusion. Notice that I make it HUGE!. The reason for this, is to facilitate undesired faces deletion. If you make it small, you waste a lot of time deleting small pieces.

  exc3. After EXPLODING the resulting 3D Solid, every single face turns into a REGION which works as surface for applying groundcover. Regions are cool, because they can be edited via boolean operations. I also create a top "cover" face using any method (i.e. 3Dface or region too).

  

Attachments:

exc4. This is the rendered model. After applying an "invisible" material to the region, assigning the desired groundcover and scaling adequately, you can see the result is very good and works wonders at certain distances (depending on the groundcover quality). I have left the "half donut" object I use for other purposes to illustrate the potential of the groundcover tool which in this case, is sort of a mulch for rocks. I always have water, walls, the half donut and the hanging plants in the model when creating new materials. I play with the scale a lot! specially because the water and the groundcovers depend on independently scaled images pretty much all the time. So, I find the desired scale WITHIN the testing model and then scale the project's model, matching both test and project to the wall thickness. 

  But this is just how I do it. I'm sure they are many other methods which work and could be simpler.

Attachments:

Ever tried this!

There are various problems related to it:

  • Trees easily grow very huge in size
  • It is difficult to set them up to stick to walls as in real life
  • Your model has to be accurate, normals facing the right direction etc, otherwise it would grow into the building
  • It creates materials with embedded textures

For that, try IvyGeneretor. George Ioannidis knows pretty well how to use it.

RSS

Search

Translate

Latest Activity

Peter Milner replied to Peter Milner's discussion RenderFarm passes and tasks
"Hi Rich, That could be the answer. We have a new designer working at one of our other sites and she may have started a drawing from scratch instead of using a template. Therefore it would be set to use the standard rendering engine. Thank you for…"
7 hours ago
Rich Hart replied to Peter Milner's discussion RenderFarm passes and tasks
"Is the rendering engine set t be the Path Tracer on that machine? I see it is disabled on my computer if the engine is set to Standard. http://accurender.ning.com/forum/topics/tasks-in-render-farm-window"
7 hours ago
Peter Milner posted a discussion

RenderFarm passes and tasks

Got a strange glitch here.On one of our PCs, when sending a render to the Farm, the option to change the number of tasks is greyed out and stuck on 10. However, when a job is sent to the farm, it is automatically broken into 25 tasks.The PC is running the latest versions of nXt and the Farm and has been working perfectly up to  now.Any ideas?See More
13 hours ago
Peter Milner commented on Peter Milner's photo
Thumbnail

screend brochure 2019 05

"You may be right on the bricks. What looks like noise is actually the texture of the fabric."
13 hours ago
George Ioannidis commented on Peter Milner's photo
Thumbnail

screend brochure 2019 05

"Those are all exceptional work, Peter! Congratulations!On this one only: bricks look big to me, but maybe I am wrong. Also some areas in shadow look still a bit noisy."
Oct 16
Peter Milner posted photos
Oct 15
Roy Hirshkowitz replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"1-  On the Rendering Tab there is a popdown called Destination.  The option is called something like "Local Out of Process".  2-  No, installation will require admin access."
Oct 5
Mark Brinkman replied to Roy Hirshkowitz's discussion AccuRender Studio for AutoCAD
"I am an old Accurender user. I now need to try and re-create some old images from old models. (about 20 years old) I have now downloaded Accurender Studio, and now work with AutoCAD 2016 and 2017 I have 2 questions related to Accurender Studio: 1)…"
Oct 4

© 2019   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service