AccuRender nXt

advanced rendering for AutoCAD

I'm working on a rendering that is composed of 6 xrefed files.  Problem is that all the material assigments made in the master file get lost everytime I exit the file.  I assume that I could assign the materials in the subfiles but I would rather not.  Any fix to this problem?  So far very pleased with the new version and compatibility with ACAD 2010.

Views: 58

Reply to This

Replies to This Discussion

First, you have to create your materials in subfiles.

Then, once you open the master, you will see them.

From that moment on, you edit your materials in the master only, materials will not get lost, but remember - changes in material definitions made in the master will not reflect back to subfiles.

If you're assigning materials ByLayer, make sure VISRETAIN is set to 1.
I set mine to 0 as the default is 1 and it often does not update when I can material assign in the original files. At 0 it updates.

Thanks,

 

Tried them and both methods work.  I guess assigning materials in the subfiles would be the more conservative method since I recall losing material definitions in AR4 when links were problematic.  On the other hand VISRETAIN would be a much easier method.  Thanks again.

 

RSS

Search

Translate

Latest Activity

Rich Hart replied to Paul Jackson's discussion Bricscad
"Unfortunately, we don't have a version that works with BricsCAD now, and that older trial version cannot be reinstated."
Jun 19
Alfons Akamp replied to Paul Jackson's discussion Bricscad
"Ich habe hier auch eine nxtrender Version für Bricscad 15. Die sieht anders aus, als die von Acad. Leider ist auch bei mir der Testzeitraum schon lange abgelaufen. Gibt es die Möglichkeit mir eine Testlizenz dafür zuzuschicken??…"
Jun 19
George Ioannidis commented on Chris Fox's photo
Thumbnail

Bedroom

"Another good rendering. Those two photoshopped reading lights are not looking good though. They don't follow the perspective, the left one is higher than the right one. Also, they are supposed to be turned on (judging from the light on wall…"
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Single Family Home

"Great image as always. I would just blur the tree shadow on the lawn to match soft shadows on the building. Nice blending of cut-out greenery. Excellent job."
Jun 15
George Ioannidis commented on Chris Fox's photo
Thumbnail

Railroad kitchen

"Very nice rendering Chris! The only thing that distracts me is the fruit bowl. It's too evidently pasted in PS.  Another thing (nothing to do with rendering) is the microwave above the stove. I would rather expect a cooker hood there."
Jun 15
akinlolu olugboji posted a discussion

trim and extension command

On AutoCad 2021.The trim and extension command works funny. I initiate the command then click the cutting edge (press entre) then click the lines I need to trim or extend.Now I initiate the command and as soon as I click the object selected trims or extend.  How can I correct this, it is really affecting my work?See More
Jun 14
Chris Fox posted photos
Jun 12
ebenezer attah koomson posted photos
Jun 3

© 2020   Header image courtesy Peter Milner   Powered by

Badges  |  Report an Issue  |  Terms of Service